HD медиа плеер WDTV. Возможности и использование альтернативных прошивок
(Тема перемещена в форум: Домашний кинотеатр: устройства воспроизведения)

Версия для печати (дайджест по поиску " Pavel-rakun")

Конференция: Конференция iXBT.com (http://forum.ixbt.com/)
Форум: Домашний кинотеатр: ТV и проекторы (http://forum.ixbt.com/?id=62)
URL: http://forum.ixbt.com/topic.cgi?id=62:15686



1912. Pavel-rakun, 09.12.2009 09:20
Добрый день! Не подскажете, есть ли где на форуме подробная инструкция по подключению и настройке USB-WiFi адаптера и USB-HUB к медиаплееру WDTV.
Цель одна- возможность закачивать фильмы и т.п. на подключенный через HUB внешний HDD не отключая его от плеера.
В данный момент установлена прошивка WDLXTV 1.03.01_0.5.8 русский. Внеший DVD привод подключил без проблем, а вот дальше знаний не хватает.
И по форуму конкретных инструкций не нашел.
Буду очень благодарен!
P.S. WiFi адаптер D-Link DWA-110.

1915. Pavel-rakun, 11.12.2009 15:08
помогите найти ссылку на wireless-mod-rt.app.bin-1.31 +RT73 - где искать?

1917. Pavel-rakun, 11.12.2009 16:08
El'Drako
Спасибо

1928. Pavel-rakun, 12.12.2009 11:03
Моя конфигурация:
WDTV
USB адаптер DWA-110
точка доступа DWL-2100AP(Only 802.11g, Channel 7 only, SSID Broadcasted, WPA2PSK, AES,DHCP)
WDLXTV 1.03.01_0.5.8 русский + wireless-mod.app.bin .
На адаптере индикатор горит постоянно, но Ip:no IP и по сети ничего не находиться
net.config пробовал стандартный
код:
 #
# Network configuration file
 
#You can override the hostname here:
HOST=wdtv
 
# if you do not set a hostname,a random one is assigned.
 
# attempt to set jumbo frames
MTU=9000
 
#
# Dynamic IP Configuration:
DHCP=yes
 
#
# Static IP Configuration:  (only if not DHCP)
#DHCP=no
#IP=192.168.0.10
#GW=192.168.0.1
#NM=255.255.255.0
#DNS1=192.168.0.1
#DNS2=205.171.3.65
 
#
# Optional:  
 
#specify time server host
#NTP=pool.ntp.org
 
#specify timezone (example=pacific North America)
#TZ=PST8PDT
 
#do not load any network drivers (saves memory)
#SUPPRESS_OTHERS=yes
messages.txt

код:
Jan  1 00:00:09 WDTV-d9d3a syslog.info syslogd started: BusyBox v1.10.0
Jan  1 00:00:09 WDTV-d9d3a user.notice kernel: klogd started: BusyBox v1.10.0 (2009-02-15 05:09:42 CST)
Jan  1 00:00:09 WDTV-d9d3a user.notice kernel: Linux version 2.6.15-TvDock (andy@SVN-server) (gcc version 4.0.4) #6 PREEMPT Fri Feb 27 20:09:23 CST 2009
Jan  1 00:00:09 WDTV-d9d3a user.warn kernel: Configured for SMP863x (revision ES6+/RevA+), detected SMP8635 (revision ES9/RevC).
Jan  1 00:00:09 WDTV-d9d3a user.warn kernel: Detected CPU/System/DSP Frequencies: 297.00/198.00/297.00MHz
Jan  1 00:00:09 WDTV-d9d3a user.info kernel: SMP863x/SMP865x Enabled Devices under Linux/XENV 0x48000000 = 0x00023efe
Jan  1 00:00:09 WDTV-d9d3a user.info kernel:  BM/IDE PCIHost Ethernet IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SCARD
Jan  1 00:00:09 WDTV-d9d3a user.warn kernel: Valid MEMCFG found at 0x10000fc0.
Jan  1 00:00:09 WDTV-d9d3a user.warn kernel: CPU revision is: 00019069
Jan  1 00:00:09 WDTV-d9d3a user.warn kernel: Determined physical RAM map:
Jan  1 00:00:09 WDTV-d9d3a user.warn kernel:  memory: 06fe0000 @ 10020000 (usable)
Jan  1 00:00:09 WDTV-d9d3a user.debug kernel: On node 0 totalpages: 94208
Jan  1 00:00:09 WDTV-d9d3a user.debug kernel:   DMA zone: 94208 pages, LIFO batch:31
Jan  1 00:00:09 WDTV-d9d3a user.debug kernel:   DMA32 zone: 0 pages, LIFO batch:0
Jan  1 00:00:09 WDTV-d9d3a user.debug kernel:   Normal zone: 0 pages, LIFO batch:0
Jan  1 00:00:09 WDTV-d9d3a user.debug kernel:   HighMem zone: 0 pages, LIFO batch:0
Jan  1 00:00:09 WDTV-d9d3a user.warn kernel: Built 1 zonelists
Jan  1 00:00:09 WDTV-d9d3a user.notice kernel: Kernel command line: console=ttyS0
Jan  1 00:00:09 WDTV-d9d3a user.warn kernel: Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Jan  1 00:00:09 WDTV-d9d3a user.warn kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Jan  1 00:00:09 WDTV-d9d3a user.warn kernel: Synthesized TLB refill handler (20 instructions).
Jan  1 00:00:09 WDTV-d9d3a user.warn kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan  1 00:00:09 WDTV-d9d3a user.warn kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan  1 00:00:09 WDTV-d9d3a user.warn kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan  1 00:00:09 WDTV-d9d3a user.warn kernel: PID hash table entries: 2048 (order: 11, 32768 bytes)
Jan  1 00:00:09 WDTV-d9d3a user.warn kernel: Using 148.500 MHz high precision timer.
Jan  1 00:00:09 WDTV-d9d3a user.warn kernel: Console: colour dummy device 80x25
Jan  1 00:00:09 WDTV-d9d3a user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan  1 00:00:09 WDTV-d9d3a user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan  1 00:00:09 WDTV-d9d3a user.info kernel: Memory: 107776k/114560k available (2635k kernel code, 6776k reserved, 392k data, 252k init, 0k highmem)
Jan  1 00:00:09 WDTV-d9d3a user.debug kernel: Calibrating delay loop... 291.84 BogoMIPS (lpj=145920)
Jan  1 00:00:09 WDTV-d9d3a user.warn kernel: Mount-cache hash table entries: 512
Jan  1 00:00:09 WDTV-d9d3a user.warn kernel: Checking for 'wait' instruction...  available.
Jan  1 00:00:09 WDTV-d9d3a user.notice root: 1.03.01.WDLXTV-0.5.8
Jan  1 00:00:09 WDTV-d9d3a user.info kernel: NET: Registered protocol family 16
Jan  1 00:00:10 WDTV-d9d3a user.warn kernel: tangox: creating TLB mapping for 0x20000000 at 0xc0000000, size 0x04000000.
Jan  1 00:00:10 WDTV-d9d3a user.warn kernel: PCI: Initializing SMP863x/SMP865x PCI host controller
Jan  1 00:00:10 WDTV-d9d3a user.warn kernel: PCI: Remapped PCI I/O space 0x58000000 to 0xc4020000, size 64 kB
Jan  1 00:00:10 WDTV-d9d3a user.warn kernel: PCI: Remapped PCI config space 0x50000000 to 0xc4004000, size 10 kB
Jan  1 00:00:10 WDTV-d9d3a user.warn kernel: PCI: Configured SMP863x/SMP865x as PCI slave with 128MB PCI memory
Jan  1 00:00:10 WDTV-d9d3a user.warn kernel: PCI: Region size is 16384KB
Jan  1 00:00:10 WDTV-d9d3a user.warn kernel: PCI: Map DMA memory 0x10020000-0x17000000 for PCI at 0x11000000
Jan  1 00:00:10 WDTV-d9d3a user.notice kernel: SCSI subsystem initialized
Jan  1 00:00:10 WDTV-d9d3a user.info kernel: usbcore: registered new driver usbfs
Jan  1 00:00:10 WDTV-d9d3a user.info kernel: usbcore: registered new driver hub
Jan  1 00:00:10 WDTV-d9d3a user.warn kernel: Created /proc/cpucache_info entry.
Jan  1 00:00:10 WDTV-d9d3a user.info kernel: NTFS driver 2.1.25 [Flags: R/O].
Jan  1 00:00:10 WDTV-d9d3a user.warn kernel: fuse init (API version 7.3)
Jan  1 00:00:10 WDTV-d9d3a user.info kernel: Initializing Cryptographic API
Jan  1 00:00:10 WDTV-d9d3a user.info kernel: io scheduler noop registered
Jan  1 00:00:10 WDTV-d9d3a user.info kernel: io scheduler anticipatory registered
Jan  1 00:00:10 WDTV-d9d3a user.notice root: Displaying detected USB devices...
Jan  1 00:00:10 WDTV-d9d3a user.info kernel: io scheduler deadline registered
Jan  1 00:00:10 WDTV-d9d3a user.info kernel: io scheduler cfq registered
Jan  1 00:00:10 WDTV-d9d3a user.info kernel: SMP86xx ir (254:0): driver loaded (wait_period = 300ms, buffer_size = 2)
Jan  1 00:00:10 WDTV-d9d3a user.info kernel: SMP86xx led_rst (253:0): driver loaded.
Jan  1 00:00:10 WDTV-d9d3a user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Jan  1 00:00:10 WDTV-d9d3a user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
Jan  1 00:00:10 WDTV-d9d3a user.info kernel: serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A
Jan  1 00:00:10 WDTV-d9d3a user.info kernel: loop: loaded (max 8 devices)
Jan  1 00:00:10 WDTV-d9d3a user.notice kernel: physmap flash device CS2: 1000000 at 48000000
Jan  1 00:00:10 WDTV-d9d3a user.info kernel: CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Jan  1 00:00:10 WDTV-d9d3a user.warn kernel:  Amd/Fujitsu Extended Query Table at 0x0040
Jan  1 00:00:10 WDTV-d9d3a user.notice kernel: number of CFI chips: 1
Jan  1 00:00:10 WDTV-d9d3a user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan  1 00:00:10 WDTV-d9d3a user.notice kernel: Using physmap partition definition
Jan  1 00:00:10 WDTV-d9d3a user.notice kernel: Adding partition #1-#5
Jan  1 00:00:10 WDTV-d9d3a user.notice root:  [07d1:3c07] 1-2( 2.00,480m) 802.11 bg WLAN
Jan  1 00:00:10 WDTV-d9d3a user.notice root:  [1043:8006] 2-1( 1.10,12m) Flash Drive
Jan  1 00:00:11 WDTV-d9d3a user.notice root:  [0000:0000] usb1( 2.00,480m) TangoX USB 2.0/tangox-ehci-hcd
Jan  1 00:00:11 WDTV-d9d3a user.notice root:  [0000:0000] usb2( 1.10,12m) USB Host Controller/TANGOX OHCI
Jan  1 00:00:10 WDTV-d9d3a user.notice kernel: Creating 5 MTD partitions on "CS2: Physically mapped flash":
Jan  1 00:00:11 WDTV-d9d3a user.notice kernel: 0x00000000-0x00060000 : "CS2-Part1"
Jan  1 00:00:11 WDTV-d9d3a user.notice kernel: 0x00060000-0x00280000 : "CS2-Part2"
Jan  1 00:00:11 WDTV-d9d3a user.notice kernel: 0x00280000-0x00fc0000 : "CS2-Part3"
Jan  1 00:00:11 WDTV-d9d3a user.notice kernel: 0x00fc0000-0x00fe0000 : "CS2-Part4"
Jan  1 00:00:11 WDTV-d9d3a user.notice kernel: 0x00fe0000-0x01000000 : "CS2-Part5"
Jan  1 00:00:11 WDTV-d9d3a user.notice kernel: physmap flash device CS3: 4000000 at 4c000000
Jan  1 00:00:11 WDTV-d9d3a user.debug kernel: CFI: Found no CS3: Physically mapped flash device at location zero
Jan  1 00:00:11 WDTV-d9d3a user.warn kernel: driver tangox-ehci-hcd, 10 Dec 2004
Jan  1 00:00:11 WDTV-d9d3a user.warn kernel: TangoX USB initializing...
Jan  1 00:00:11 WDTV-d9d3a user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
Jan  1 00:00:11 WDTV-d9d3a user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
Jan  1 00:00:11 WDTV-d9d3a user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021500
Jan  1 00:00:11 WDTV-d9d3a user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
Jan  1 00:00:11 WDTV-d9d3a user.info kernel: hub 1-0:1.0: USB hub found
Jan  1 00:00:11 WDTV-d9d3a user.info kernel: hub 1-0:1.0: 2 ports detected
Jan  1 00:00:11 WDTV-d9d3a user.warn kernel: TangoX USB was initialized.
Jan  1 00:00:11 WDTV-d9d3a user.warn kernel: Initializing TangoX US
Jan  1 00:00:11 WDTV-d9d3a user.info kernel: B OHCI Controller Membase=0xa0021500, irq=47
Jan  1 00:00:11 WDTV-d9d3a user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
Jan  1 00:00:11 WDTV-d9d3a user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
Jan  1 00:00:11 WDTV-d9d3a user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
Jan  1 00:00:11 WDTV-d9d3a user.info kernel: hub 2-0:1.0: USB hub found
Jan  1 00:00:11 WDTV-d9d3a user.info kernel: hub 2-0:1.0: 2 ports detected
Jan  1 00:00:11 WDTV-d9d3a user.info kernel: Initializing USB Mass Storage driver...
Jan  1 00:00:11 WDTV-d9d3a user.info kernel: usb 1-2: new high speed USB device using tangox-ehci-hcd and address 3
Jan  1 00:00:11 WDTV-d9d3a user.info kernel: usbcore: registered new driver usb-storage
Jan  1 00:00:11 WDTV-d9d3a user.info kernel: USB Mass Storage support registered.
Jan  1 00:00:11 WDTV-d9d3a user.info kernel: NET: Registered protocol family 2
Jan  1 00:00:11 WDTV-d9d3a user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 00:00:11 WDTV-d9d3a user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan  1 00:00:11 WDTV-d9d3a user.warn kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Jan  1 00:00:11 WDTV-d9d3a user.info kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jan  1 00:00:11 WDTV-d9d3a user.info kernel: TCP reno registered
Jan  1 00:00:11 WDTV-d9d3a user.info kernel: TCP bic registered
Jan  1 00:00:11 WDTV-d9d3a user.info kernel: NET: Registered protocol family 1
Jan  1 00:00:11 WDTV-d9d3a user.info kernel: NET: Registered protocol family 17
Jan  1 00:00:11 WDTV-d9d3a user.info kernel: Freeing unused kernel memory: 252k freed
Jan  1 00:00:11 WDTV-d9d3a user.info kernel: usb 2-1: new full speed USB device using tangox-ohci-hcd and address 2
Jan  1 00:00:11 WDTV-d9d3a user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan  1 00:00:11 WDTV-d9d3a user.debug kernel: usb-storage: device found at 2
Jan  1 00:00:11 WDTV-d9d3a user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan  1 00:00:11 WDTV-d9d3a user.warn kernel: cdrom: no version for "struct_module" found: kernel tainted.
Jan  1 00:00:11 WDTV-d9d3a user.warn kernel: cdrom: No versions for exported symbols. Tainting kernel.
Jan  1 00:00:11 WDTV-d9d3a user.warn kernel: llad: module license 'LGPL' taints kernel.
Jan  1 00:00:11 WDTV-d9d3a user.notice kernel:   Vendor: Generic   Model: USB Flash Drive   Rev:     
Jan  1 00:00:11 WDTV-d9d3a user.notice kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
Jan  1 00:00:11 WDTV-d9d3a user.notice kernel: SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
Jan  1 00:00:12 WDTV-d9d3a user.notice kernel: sda: Write Protect is off
Jan  1 00:00:12 WDTV-d9d3a user.debug kernel: sda: Mode Sense: 0b 00 00 08
Jan  1 00:00:12 WDTV-d9d3a user.err kernel: sda: assuming drive cache: write through
Jan  1 00:00:12 WDTV-d9d3a user.notice kernel: SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
Jan  1 00:00:12 WDTV-d9d3a user.notice kernel: sda: Write Protect is off
Jan  1 00:00:12 WDTV-d9d3a user.debug kernel: sda: Mode Sense: 0b 00 00 08
Jan  1 00:00:12 WDTV-d9d3a user.err kernel: sda: assuming drive cache: write through
Jan  1 00:00:12 WDTV-d9d3a user.info kernel:  sda: unknown partition table
Jan  1 00:00:12 WDTV-d9d3a user.notice kernel: sd 0:0:0:0: Attached scsi removable disk sda
Jan  1 00:00:12 WDTV-d9d3a user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan  1 00:00:12 WDTV-d9d3a user.debug kernel: usb-storage: device scan complete
Jan  1 00:00:12 WDTV-d9d3a user.warn kernel: em8xxx [/home/andy/WDTV/house_1.03.01/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1463] init_module: begun
Jan  1 00:00:12 WDTV-d9d3a user.warn kernel: em8xxx0 [/home/andy/WDTV/house_1.03.01/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1346] identify: board as unknown subid
Jan  1 00:00:12 WDTV-d9d3a user.warn kernel: em8xxx [/home/andy/WDTV/house_1.03.01/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1449] identify: device 0x8635 0x86 accepted with software tango2revC
Jan  1 00:00:12 WDTV-d9d3a user.warn kernel: mumk_register_tasklet: (0) tasklet c403f000 status @c938aa24
Jan  1 00:00:12 WDTV-d9d3a user.warn kernel: em8xxx [/home/andy/WDTV/house_1.03.01/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1581] init_module: done. Found 1 em8xxx
Jan  1 00:00:12 WDTV-d9d3a user.warn kernel: loop: No versions for exported symbols. Tainting kernel.
Jan  1 00:00:12 WDTV-d9d3a user.info kernel: loop: loaded (max 24 devices)
Jan  1 00:00:12 WDTV-d9d3a user.notice crazyboot: /dev/mtdblock2: LABEL="PRIMARY_SYSTEM" TYPE="romfs" 
Jan  1 00:00:12 WDTV-d9d3a user.notice crazyboot: /dev/mtdblock3: LABEL="Compressed" TYPE="cramfs" 
Jan  1 00:00:12 WDTV-d9d3a user.notice crazyboot: /dev/sda: UUID="74D6-F013" TYPE="vfat" 
Jan  1 00:00:13 WDTV-d9d3a user.notice xmount: xmounted /dev/sda
Jan  1 00:00:13 WDTV-d9d3a user.notice crazyboot: mounting app binaries...
Jan  1 00:00:14 WDTV-d9d3a user.warn xmount: partition with label (sda) already mounted!
Jan  1 00:00:14 WDTV-d9d3a user.notice crazyboot: checking DEVICE /dev/sda for app.bins
Jan  1 00:00:14 WDTV-d9d3a user.notice crazyboot: log-saver app found
Jan  1 00:00:14 WDTV-d9d3a user.notice crazyboot: Mounting log-saver.app.bin at /apps/log-saver
Jan  1 00:00:14 WDTV-d9d3a user.info kernel: attempt to access beyond end of device
Jan  1 00:00:14 WDTV-d9d3a user.info kernel: loop0: rw=0, want=68, limit=8
Jan  1 00:00:14 WDTV-d9d3a user.info kernel: attempt to access beyond end of device
Jan  1 00:00:14 WDTV-d9d3a user.info kernel: loop0: rw=0, want=1028, limit=8
Jan  1 00:00:14 WDTV-d9d3a user.info kernel: attempt to access beyond end of device
Jan  1 00:00:14 WDTV-d9d3a user.info kernel: loop0: rw=0, want=12, limit=8
Jan  1 00:00:14 WDTV-d9d3a user.info kernel: attempt to access beyond end of device
Jan  1 00:00:14 WDTV-d9d3a user.info kernel: loop0: rw=0, want=1028, limit=8
Jan  1 00:00:14 WDTV-d9d3a user.info kernel: attempt to access beyond end of device
Jan  1 00:00:14 WDTV-d9d3a user.info kernel: loop0: rw=0, want=12, limit=8
Jan  1 00:00:14 WDTV-d9d3a user.info kernel: attempt to access beyond end of device
Jan  1 00:00:14 WDTV-d9d3a user.info kernel: loop0: rw=0, want=1252, limit=8
Jan  1 00:00:14 WDTV-d9d3a user.info kernel: attempt to access beyond end of device
Jan  1 00:00:14 WDTV-d9d3a user.info kernel: loop0: rw=0, want=1028, limit=8
Jan  1 00:00:14 WDTV-d9d3a user.warn kernel: UDF-fs: No partition found (1)
Jan  1 00:00:15 WDTV-d9d3a user.notice crazyboot: wireless-mod app found
Jan  1 00:00:15 WDTV-d9d3a user.notice crazyboot: Mounting wireless-mod.app.bin at /apps/wireless-mod
Jan  1 00:00:16 WDTV-d9d3a user.warn kernel: UDF-fs: No VRS found
Jan  1 00:00:17 WDTV-d9d3a user.notice crazyboot: extension[s] found on /dev/sda - do not remove device from wdtv
Jan  1 00:00:18 WDTV-d9d3a user.notice crazyboot: adjusting LIBPATH
Jan  1 00:00:18 WDTV-d9d3a user.notice root: adjusting PATH
Jan  1 00:00:18 WDTV-d9d3a user.notice crazyboot: Path set to /apps/wireless-mod/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
Jan  1 00:00:19 WDTV-d9d3a user.notice mount.watch: starting
Jan  1 00:00:21 WDTV-d9d3a user.warn kernel: mii: No versions for exported symbols. Tainting kernel.
Jan  1 00:00:22 WDTV-d9d3a user.warn kernel: usbnet: No versions for exported symbols. Tainting kernel.
Jan  1 00:00:22 WDTV-d9d3a user.info kernel: usbcore: registered new driver asix
Jan  1 00:00:22 WDTV-d9d3a user.info kernel: /home/Zehd/wdtv/dm9601/dm9601.c: /home/Zehd/wdtv/dm9601/dm9601.c: v0.0.6 2001/05/24 (C) 1999-2000 Petko Manolov (petkan@dce.bg)
Jan  1 00:00:23 WDTV-d9d3a user.info kernel: usbcore: registered new driver dm9601
Jan  1 00:00:23 WDTV-d9d3a user.info kernel: usbcore: registered new driver kaweth
Jan  1 00:00:23 WDTV-d9d3a user.info kernel: usbcore: registered new driver MOSCHIP usb-ethernet driver
Jan  1 00:00:24 WDTV-d9d3a user.info kernel: pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
Jan  1 00:00:24 WDTV-d9d3a user.info kernel: usbcore: registered new driver pegasus
Jan  1 00:00:24 WDTV-d9d3a user.info kernel: drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
Jan  1 00:00:24 WDTV-d9d3a user.info kernel: usbcore: registered new driver rtl8150
Jan  1 00:00:24 WDTV-d9d3a user.warn kernel: cdc_ether: No versions for exported symbols. Tainting kernel.
Jan  1 00:00:24 WDTV-d9d3a user.info kernel: usbcore: registered new driver cdc_ether
Jan  1 00:00:24 WDTV-d9d3a user.info kernel: usbcore: registered new driver catc
Jan  1 00:00:24 WDTV-d9d3a user.info kernel: drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
Jan  1 00:00:24 WDTV-d9d3a user.info kernel: usbcore: registered new driver cdc_subset
Jan  1 00:00:25 WDTV-d9d3a user.info kernel: usbcore: registered new driver net1080
Jan  1 00:00:26 WDTV-d9d3a user.info kernel: usbcore: registered new driver plusb
Jan  1 00:00:26 WDTV-d9d3a user.info kernel: usbcore: registered new driver rndis_host
Jan  1 00:00:26 WDTV-d9d3a user.info kernel: usbcore: registered new driver gl620a
Jan  1 00:00:26 WDTV-d9d3a user.warn kernel: wireless_ext: No versions for exported symbols. Tainting kernel.
Jan  1 00:00:26 WDTV-d9d3a user.info kernel: Loading wireless extentions module...
Jan  1 00:00:27 WDTV-d9d3a user.warn kernel: zd1201: Unknown symbol release_firmware
Jan  1 00:00:28 WDTV-d9d3a user.warn kernel: zd1201: Unknown symbol request_firmware
Jan  1 00:00:28 WDTV-d9d3a user.notice kernel: ZD1211B - version 2.19.2.9
Jan  1 00:00:28 WDTV-d9d3a user.info kernel: usbcore: registered new driver zd1211b
Jan  1 00:00:29 WDTV-d9d3a user.notice kernel: arusb - version 0.0.0.999
Jan  1 00:00:30 WDTV-d9d3a user.info kernel: usbcore: registered new driver Otus
Jan  1 00:00:31 WDTV-d9d3a user.warn kernel: rtusb init --->
Jan  1 00:00:31 WDTV-d9d3a user.info kernel: usbcore: registered new driver rt2870
Jan  1 00:00:32 WDTV-d9d3a user.warn kernel: idVendor = 0x7d1, idProduct = 0x3c07 
Jan  1 00:00:32 WDTV-d9d3a user.notice root: net.agent:  Called for rausb0
Jan  1 00:00:32 WDTV-d9d3a user.notice root: net.agent: No IP provided, doing DHCP
Jan  1 00:00:33 WDTV-d9d3a user.warn kernel: => usb_rtusb_open
Jan  1 00:00:33 WDTV-d9d3a user.info kernel: usbcore: registered new driver rt73
Jan  1 00:00:35 WDTV-d9d3a daemon.info utelnetd[1222]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Jan  1 00:00:39 WDTV-d9d3a user.debug kernel: ir: Enable NEC decoder (0x00000000)
Jan  1 00:00:39 WDTV-d9d3a user.debug kernel: ir: Enable RC5 decoder (0x00000000)
Jan  1 00:00:51 WDTV-d9d3a user.notice mount.watch: Unmounting official device /tmp/media/usb/sda

Пробовал net.config такой:
код:
 HOST=wdtv
DHCP=yes
TZ=MSK-3MSD
NTP=pool.ntp.org
WLAN_CFG=rt73sta.dat
WLAN_LOAD=rt73.ko
WLAN_UP=yes
WLAN_SLEEP=10
sleep 10
iwlist $MDEV scanning >> /boot/log_iwlist.txt 
ifconfig -a >> /boot/log_ifconfig.txt
ntpclient -h pool.ntp.org -s
с дополнительным rt73sta.dat
код:
 [Default]
CountryRegion=5
CountryRegionABand=7
WirelessMode=4
SSID=wdtv
NetworkType=Infra
Channel=7
AuthMode=WPA2PSK
EncrypType=AES
DefaultKeyID=1
Key1Type=0
Key1Str=0123456789
Key2Type=0
Key2Str=
Key3Type=0
Key3Str=
Key4Type=0
Key4Str=
WPAPSK=1234567890
TxBurst=0
PktAggregate=0
TurboRate=0
WmmCapable=0
AckPolicy=0;0;0;0
BGProtection=0
IEEE80211H=0
TxRate=12
RTSThreshold=2347
FragThreshold=2346
PSMode=CAM
TxPreamble=0
AdhocOfdm=0
FastRoaming=0
RoamThreshold=70


и конфигурацией как у RooRoo
Ext3-boot 1.03.01_ext3-boot_0.9.2_lilibabe6x2_big_ru_eldrako +wireless-mod-rt.app.bin-1.2.4 + rt73sta.dat- в этом случае WiFi адаптер вообще молчит(индикации нет).

Не силен я в таких делах(в голове уже каша) -нужен совет.
Спасибо.

1931. Pavel-rakun, 12.12.2009 11:56
цитата:
El'Drako:
Pavel-rakun
я в логе вообще ничего, кроме флешки в портах.

выложи лог для второго случая.

Вот:wpasupplicant.conf
код:
ctrl_interface=/tmp/wpa_supplicant
#ap_scan=2
network={
	ssid="wdtv"
# uncomment next line if your ap doesn't broadcast ssid
#	scan_ssid=1
	proto=WPA
	key_mgmt=WPA-PSK
	pairwise=TKIP
	group=TKIP
#	psk="1234567890"
	psk=720da95ace96135b11bc0bddd5f655ef075442b40a90ebbadbbe421dae672a66
}
messages.txt
код:
Jan  1 03:00:43 wdtv syslog.info syslogd started: BusyBox v1.10.0
Jan  1 03:00:43 wdtv user.notice kernel: klogd started: BusyBox v1.10.0 (2009-02-15 05:09:42 CST)
Jan  1 03:00:43 wdtv user.notice kernel: Linux version 2.6.15-TvDock (andy@SVN-server) (gcc version 4.0.4) #6 PREEMPT Fri Feb 27 20:09:23 CST 2009
Jan  1 03:00:43 wdtv user.warn kernel: Configured for SMP863x (revision ES6+/RevA+), detected SMP8635 (revision ES9/RevC).
Jan  1 03:00:43 wdtv user.warn kernel: Detected CPU/System/DSP Frequencies: 297.00/198.00/297.00MHz
Jan  1 03:00:43 wdtv user.info kernel: SMP863x/SMP865x Enabled Devices under Linux/XENV 0x48000000 = 0x00023efe
Jan  1 03:00:43 wdtv user.info kernel:  BM/IDE PCIHost Ethernet IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SCARD
Jan  1 03:00:43 wdtv user.warn kernel: Valid MEMCFG found at 0x10000fc0.
Jan  1 03:00:43 wdtv user.warn kernel: CPU revision is: 00019069
Jan  1 03:00:43 wdtv user.warn kernel: Determined physical RAM map:
Jan  1 03:00:43 wdtv user.warn kernel:  memory: 06fe0000 @ 10020000 (usable)
Jan  1 03:00:43 wdtv user.debug kernel: On node 0 totalpages: 94208
Jan  1 03:00:43 wdtv user.debug kernel:   DMA zone: 94208 pages, LIFO batch:31
Jan  1 03:00:43 wdtv user.notice root: Displaying detected USB devices...
Jan  1 03:00:43 wdtv user.debug kernel:   DMA32 zone: 0 pages, LIFO batch:0
Jan  1 03:00:44 wdtv user.notice root:  [07d1:3c07] 1-2( 2.00,480m) 802.11 bg WLAN
Jan  1 03:00:44 wdtv user.debug kernel:   Normal zone: 0 pages, LIFO batch:0
Jan  1 03:00:44 wdtv user.notice root:  [1043:8006] 2-1( 1.10,12m) Flash Drive
Jan  1 03:00:44 wdtv user.debug kernel:   HighMem zone: 0 pages, LIFO batch:0
Jan  1 03:00:44 wdtv user.warn kernel: Built 1 zonelists
Jan  1 03:00:44 wdtv user.notice root:  [0000:0000] usb1( 2.00,480m) TangoX USB 2.0/tangox-ehci-hcd
Jan  1 03:00:44 wdtv user.notice kernel: Kernel command line: console=ttyS0
Jan  1 03:00:45 wdtv user.warn kernel: Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Jan  1 03:00:45 wdtv user.notice root:  [0000:0000] usb2( 1.10,12m) USB Host Controller/TANGOX OHCI
Jan  1 03:00:45 wdtv user.warn kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Jan  1 03:00:45 wdtv daemon.info utelnetd[523]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Jan  1 03:00:46 wdtv user.warn kernel: Synthesized TLB refill handler (20 instructions).
Jan  1 03:00:46 wdtv user.warn kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan  1 03:00:46 wdtv user.notice root: ***crazymounter
Jan  1 03:00:46 wdtv user.warn kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan  1 03:00:47 wdtv user.notice root: INIT: mounting app binaries...
Jan  1 03:00:47 wdtv user.warn kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan  1 03:00:47 wdtv user.notice root: Mounting /boot/log-saver.app.bin at /apps/log-saver
Jan  1 03:00:47 wdtv user.warn kernel: PID hash table entries: 2048 (order: 11, 32768 bytes)
Jan  1 03:00:47 wdtv user.warn kernel: Using 148.500 MHz high precision timer.
Jan  1 03:00:47 wdtv user.warn kernel: Console: colour dummy device 80x25
Jan  1 03:00:48 wdtv user.notice root: Mounting /boot/wireless-mod-rt.app.bin at /apps/wireless-mod-rt
Jan  1 03:00:49 wdtv user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan  1 03:00:49 wdtv user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan  1 03:00:49 wdtv user.info kernel: Memory: 107776k/114560k available (2635k kernel code, 6776k reserved, 392k data, 252k init, 0k highmem)
Jan  1 03:00:49 wdtv user.debug kernel: Calibrating delay loop... 291.84 BogoMIPS (lpj=145920)
Jan  1 03:00:49 wdtv user.warn kernel: Mount-cache hash table entries: 512
Jan  1 03:00:50 wdtv user.warn kernel: Checking for 'wait' instruction...  available.
Jan  1 03:00:50 wdtv user.info kernel: NET: Registered protocol family 16
Jan  1 03:00:50 wdtv user.warn kernel: tangox: creating TLB mapping for 0x20000000 at 0xc0000000, size 0x04000000.
Jan  1 03:00:50 wdtv user.warn kernel: PCI: Initializing SMP863x/SMP865x PCI host controller
Jan  1 03:00:51 wdtv user.warn kernel: PCI: Remapped PCI I/O space 0x58000000 to 0xc4020000, size 64 kB
Jan  1 03:00:51 wdtv user.notice root: Path set to /apps/wireless-mod-rt/bin:/boot/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
Jan  1 03:00:51 wdtv user.warn kernel: PCI: Remapped PCI config space 0x50000000 to 0xc4004000, size 10 kB
Jan  1 03:00:51 wdtv user.warn kernel: PCI: Configured SMP863x/SMP865x as PCI slave with 128MB PCI memory
Jan  1 03:00:52 wdtv user.warn kernel: PCI: Region size is 16384KB
Jan  1 03:00:52 wdtv user.warn kernel: PCI: Map DMA memory 0x10020000-0x17000000 for PCI at 0x11000000
Jan  1 03:00:52 wdtv user.notice kernel: SCSI subsystem initialized
Jan  1 03:00:52 wdtv user.info kernel: usbcore: registered new driver usbfs
Jan  1 03:00:52 wdtv user.info kernel: usbcore: registered new driver hub
Jan  1 03:00:53 wdtv user.warn kernel: Created /proc/cpucache_info entry.
Jan  1 03:00:53 wdtv user.notice root: vfat: Waiting for 682D-30B4 to mount
Jan  1 03:00:53 wdtv user.info kernel: NTFS driver 2.1.25 [Flags: R/O].
Jan  1 03:00:53 wdtv user.notice root: Polling detected drives...
Jan  1 03:00:53 wdtv user.warn kernel: fuse init (API version 7.3)
Jan  1 03:00:54 wdtv user.info kernel: Initializing Cryptographic API
Jan  1 03:00:54 wdtv user.info kernel: io scheduler noop registered
Jan  1 03:00:55 wdtv user.notice root: Waiting for /dev/sda to come online (UUID=682D-30B4)...
Jan  1 03:00:55 wdtv user.info kernel: io scheduler anticipatory registered
Jan  1 03:00:55 wdtv authpriv.info dropbear[725]: Running in background
Jan  1 03:00:55 wdtv user.info kernel: io scheduler deadline registered
Jan  1 03:00:56 wdtv user.info kernel: io scheduler cfq registered
Jan  1 03:00:56 wdtv user.info kernel: SMP86xx ir (254:0): driver loaded (wait_period = 300ms, buffer_size = 2)
Jan  1 03:00:56 wdtv user.info kernel: SMP86xx led_rst (253:0): driver loaded.
Jan  1 03:00:57 wdtv user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Jan  1 03:00:58 wdtv user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
Jan  1 03:00:59 wdtv user.info kernel: serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A
Jan  1 03:00:59 wdtv user.info kernel: loop: loaded (max 8 devices)
Jan  1 03:00:59 wdtv user.notice kernel: physmap flash device CS2: 1000000 at 48000000
Jan  1 03:00:59 wdtv user.info kernel: CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Jan  1 03:01:00 wdtv user.warn kernel:  Amd/Fujitsu Extended Query Table at 0x0040
Jan  1 03:01:00 wdtv user.notice kernel: number of CFI chips: 1
Jan  1 03:01:01 wdtv user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan  1 03:01:01 wdtv user.notice kernel: Using physmap partition definition
Jan  1 03:01:01 wdtv user.notice kernel: Adding partition #1-#5
Jan  1 03:01:01 wdtv user.notice kernel: Creating 5 MTD partitions on "CS2: Physically mapped flash":
Jan  1 03:01:02 wdtv user.notice kernel: 0x00000000-0x00060000 : "CS2-Part1"
Jan  1 03:01:04 wdtv user.notice kernel: 0x00060000-0x00280000 : "CS2-Part2"
Jan  1 03:01:04 wdtv user.notice kernel: 0x00280000-0x00fc0000 : "CS2-Part3"
Jan  1 03:01:04 wdtv user.notice kernel: 0x00fc0000-0x00fe0000 : "CS2-Part4"
Jan  1 03:01:05 wdtv user.notice kernel: 0x00fe0000-0x01000000 : "CS2-Part5"
Jan  1 03:01:06 wdtv user.notice kernel: physmap flash device CS3: 4000000 at 4c000000
Jan  1 03:01:06 wdtv user.debug kernel: CFI: Found no CS3: Physically mapped flash device at location zero
Jan  1 03:01:07 wdtv user.warn kernel: driver tangox-ehci-hcd, 10 Dec 2004
Jan  1 03:01:07 wdtv user.warn kernel: TangoX USB initializing...
Jan  1 03:01:07 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
Jan  1 03:01:08 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
Jan  1 03:01:08 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021500
Jan  1 03:01:08 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
Jan  1 03:01:09 wdtv user.info kernel: hub 1-0:1.0: USB hub found
Jan  1 03:01:09 wdtv user.info kernel: hub 1-0:1.0: 2 ports detected
Jan  1 03:01:10 wdtv user.warn kernel: TangoX USB was initialized.
Jan  1 03:01:10 wdtv user.warn kernel: Initializing TangoX US
Jan  1 03:01:10 wdtv user.info kernel: B OHCI Controller Membase=0xa0021500, irq=47
Jan  1 03:01:10 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
Jan  1 03:01:11 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
Jan  1 03:01:11 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
Jan  1 03:01:11 wdtv user.info kernel: hub 2-0:1.0: USB hub found
Jan  1 03:01:11 wdtv user.info kernel: hub 2-0:1.0: 2 ports detected
Jan  1 03:01:11 wdtv user.info kernel: Initializing USB Mass Storage driver...
Jan  1 03:01:11 wdtv user.info kernel: usb 1-2: new high speed USB device using tangox-ehci-hcd and address 3
Jan  1 03:01:12 wdtv user.info kernel: usbcore: registered new driver usb-storage
Jan  1 03:01:12 wdtv user.info kernel: USB Mass Storage support registered.
Jan  1 03:01:12 wdtv user.info kernel: NET: Registered protocol family 2
Jan  1 03:01:12 wdtv user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 03:01:12 wdtv user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan  1 03:01:12 wdtv user.warn kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Jan  1 03:01:12 wdtv user.info kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jan  1 03:01:13 wdtv user.info kernel: TCP reno registered
Jan  1 03:01:13 wdtv user.info kernel: TCP bic registered
Jan  1 03:01:13 wdtv user.info kernel: NET: Registered protocol family 1
Jan  1 03:01:13 wdtv user.info kernel: NET: Registered protocol family 17
Jan  1 03:01:13 wdtv user.info kernel: Freeing unused kernel memory: 252k freed
Jan  1 03:01:14 wdtv user.info kernel: usb 2-1: new full speed USB device using tangox-ohci-hcd and address 2
Jan  1 03:01:17 wdtv user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan  1 03:01:17 wdtv user.debug kernel: usb-storage: device found at 2
Jan  1 03:01:17 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan  1 03:01:17 wdtv user.notice kernel:   Vendor: Generic   Model: USB Flash Drive   Rev:     
Jan  1 03:01:18 wdtv user.notice kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
Jan  1 03:01:18 wdtv user.notice kernel: SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
Jan  1 03:01:18 wdtv user.notice kernel: sda: Write Protect is off
Jan  1 03:01:18 wdtv user.debug kernel: sda: Mode Sense: 0b 00 00 08
Jan  1 03:01:18 wdtv user.err kernel: sda: assuming drive cache: write through
Jan  1 03:01:18 wdtv user.notice kernel: SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
Jan  1 03:01:18 wdtv user.notice kernel: sda: Write Protect is off
Jan  1 03:01:18 wdtv user.debug kernel: sda: Mode Sense: 0b 00 00 08
Jan  1 03:01:19 wdtv user.err kernel: sda: assuming drive cache: write through
Jan  1 03:01:19 wdtv user.info kernel:  sda: unknown partition table
Jan  1 03:01:19 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi removable disk sda
Jan  1 03:01:19 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan  1 03:01:20 wdtv user.debug kernel: usb-storage: device scan complete
Jan  1 03:01:20 wdtv user.info kernel: kjournald starting.  Commit interval 5 seconds
Jan  1 03:01:20 wdtv user.info kernel: EXT3 FS on loop1, internal journal
Jan  1 03:01:20 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan  1 03:01:20 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan  1 03:01:20 wdtv user.warn kernel: llad: module license 'LGPL' taints kernel.
Jan  1 03:01:21 wdtv user.warn kernel: em8xxx: no version for "llad_open" found: kernel tainted.
Jan  1 03:01:21 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1.03.01/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1463] init_module: begun
Jan  1 03:01:22 wdtv user.warn kernel: em8xxx0 [/home/andy/WDTV/house_1.03.01/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1346] identify: board as unknown subid
Jan  1 03:01:22 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1.03.01/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1449] identify: device 0x8635 0x86 accepted with software tango2revC
Jan  1 03:01:22 wdtv user.warn kernel: mumk_register_tasklet: (0) tasklet c401e000 status @c938aa24
Jan  1 03:01:22 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1.03.01/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1581] init_module: done. Found 1 em8xxx
Jan  1 03:01:23 wdtv user.info kernel: kjournald starting.  Commit interval 5 seconds
Jan  1 03:01:23 wdtv user.info kernel: EXT3 FS on loop2, internal journal
Jan  1 03:01:23 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan  1 03:01:23 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan  1 03:01:23 wdtv user.info kernel: SMP86xx ir (252:0): driver loaded (wait_period = 100ms, buffer_size = 6)
Jan  1 03:01:23 wdtv user.warn kernel: SMP86xx fip (251:0): driver loaded (buffer_size = 2)
Jan  1 03:01:24 wdtv user.warn kernel: cdrom: No versions for exported symbols. Tainting kernel.
Jan  1 03:01:24 wdtv user.warn kernel: mii: No versions for exported symbols. Tainting kernel.
Jan  1 03:01:25 wdtv user.notice root: wireless-mod-rt: Starting..
Jan  1 03:01:25 wdtv user.warn kernel: usbnet: No versions for exported symbols. Tainting kernel.
Jan  1 03:01:26 wdtv user.notice root: wireless-mod-rt: Installing new device configs to /etc/mdev.conf
Jan  1 03:01:26 wdtv user.info kernel: usbcore: registered new driver asix
Jan  1 03:01:26 wdtv user.info kernel: /home/Zehd/wdtv/dm9601/dm9601.c: /home/Zehd/wdtv/dm9601/dm9601.c: v0.0.6 2001/05/24 (C) 1999-2000 Petko Manolov (petkan@dce.bg)
Jan  1 03:01:27 wdtv user.info kernel: usbcore: registered new driver dm9601
Jan  1 03:01:28 wdtv user.info kernel: usbcore: registered new driver kaweth
Jan  1 03:01:28 wdtv user.info kernel: usbcore: registered new driver MOSCHIP usb-ethernet driver
Jan  1 03:01:28 wdtv user.info kernel: pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
Jan  1 03:01:28 wdtv user.info kernel: usbcore: registered new driver pegasus
Jan  1 03:01:28 wdtv user.info kernel: usbcore: registered new driver catc
Jan  1 03:01:28 wdtv user.info kernel: drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
Jan  1 03:01:28 wdtv user.info kernel: drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
Jan  1 03:01:28 wdtv user.info kernel: usbcore: registered new driver rtl8150
Jan  1 03:01:29 wdtv user.warn kernel: cdc_ether: No versions for exported symbols. Tainting kernel.
Jan  1 03:01:29 wdtv user.info kernel: usbcore: registered new driver cdc_ether
Jan  1 03:01:29 wdtv user.info kernel: usbcore: registered new driver cdc_subset
Jan  1 03:01:29 wdtv user.info kernel: usbcore: registered new driver net1080
Jan  1 03:01:30 wdtv user.info kernel: usbcore: registered new driver plusb
Jan  1 03:01:30 wdtv user.info kernel: usbcore: registered new driver rndis_host
Jan  1 03:01:30 wdtv user.info kernel: usbcore: registered new driver gl620a
Jan  1 03:01:30 wdtv user.warn kernel: wireless_ext: No versions for exported symbols. Tainting kernel.
Jan  1 03:01:30 wdtv user.info kernel: Loading wireless extentions module...
Jan  1 03:01:38 wdtv user.notice root: wireless-mod-rt: WLAN_LOAD=rt73.ko, config=/boot/rt73sta.dat
Jan  1 03:01:38 wdtv user.notice root: wireless-mod-rt: Copying /boot/rt73sta.dat to /etc
Jan  1 03:01:39 wdtv user.notice root: wireless-mod-rt: Installing rt73.ko firmware
Jan  1 03:01:39 wdtv user.notice root: wireless-mod-rt: Install modules /apps/wireless-mod-rt/modules/rt73.ko
Jan  1 03:01:40 wdtv user.warn kernel: idVendor = 0x7d1, idProduct = 0x3c07 
Jan  1 03:01:41 wdtv user.notice root: wireless-mod-rt: hotplug action=add
Jan  1 03:01:41 wdtv user.info kernel: usbcore: registered new driver rt73
Jan  1 03:01:47 wdtv daemon.notice statd[1925]: Version 1.1.5 Starting
Jan  1 03:01:47 wdtv daemon.notice statd[1925]: statd running as root. chown /tmp/nfs/sm to choose different user
Jan  1 03:01:52 wdtv user.notice root: wireless-mod-rt: Bringing up wireless device 'rausb0'...
Jan  1 03:01:52 wdtv user.warn kernel: => usb_rtusb_open
Jan  1 03:01:53 wdtv user.notice root: wireless-mod-rt: Waiting for AP association...
Jan  1 03:01:53 wdtv user.debug kernel: rausb0 (WE) : Driver using old /proc/net/wireless support, please fix driver !
Jan  1 03:01:53 wdtv user.notice root: wireless-mod-rt: AP not associated ... sleeping for 10 sec
Jan  1 03:01:58 wdtv user.debug kernel: ir: Enable NEC decoder (0x00000000)
Jan  1 03:01:58 wdtv user.debug kernel: ir: Enable RC5 decoder (0x80001e00)
Jan  1 03:02:03 wdtv user.notice root: wireless-mod-rt: AP not associated ... sleeping for 10 sec
Jan  1 03:02:10 wdtv user.notice root: xmounter: entering stage2
Jan  1 03:02:10 wdtv user.notice root: Now mounted:
Jan  1 03:02:10 wdtv user.notice root: rootfs on / type rootfs (rw)
Jan  1 03:02:10 wdtv user.notice root: proc on /proc type proc (rw,nodiratime)
Jan  1 03:02:10 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan  1 03:02:10 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan  1 03:02:10 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan  1 03:02:10 wdtv user.notice root: /dev/sda on /boot type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan  1 03:02:10 wdtv user.notice root: /dev/loop1 on / type ext3 (rw,noatime,nodiratime,data=ordered)
Jan  1 03:02:10 wdtv user.notice root: none on /proc type proc (rw,nodiratime)
Jan  1 03:02:10 wdtv user.notice root: usb on /proc/bus/usb type usbfs (rw)
Jan  1 03:02:10 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan  1 03:02:10 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan  1 03:02:10 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan  1 03:02:10 wdtv user.notice root: none on /tmp type tmpfs (rw)
Jan  1 03:02:10 wdtv user.notice root: none on /apps type tmpfs (rw)
Jan  1 03:02:10 wdtv user.notice root: /dev/loop0 on /apps/log-saver type cramfs (ro)
Jan  1 03:02:10 wdtv user.notice root: /dev/loop2 on /apps/wireless-mod-rt type ext3 (rw,data=ordered)
Jan  1 03:02:11 wdtv user.notice root: /dev/sda0 on /tmp/media/usb/USB1/682D-30B4 type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan  1 03:02:13 wdtv user.notice root: wireless-mod-rt: AP not associated ... sleeping for 10 sec
Jan  1 03:02:23 wdtv user.notice root: wireless-mod-rt: AP not associated ... sleeping for 10 sec
Jan  1 03:02:33 wdtv user.notice root: wireless-mod-rt: AP not associated ... sleeping for 10 sec
Jan  1 03:02:43 wdtv user.notice root: wireless-mod-rt: AP not associated ... sleeping for 10 sec
Jan  1 03:02:54 wdtv user.notice root: wireless-mod-rt: AP not associated ... sleeping for 10 sec
Jan  1 03:03:04 wdtv user.notice root: wireless-mod-rt: AP not associated ... sleeping for 10 sec
Jan  1 03:03:14 wdtv user.notice root: wireless-mod-rt: AP not associated ... sleeping for 10 sec
Jan  1 03:03:24 wdtv user.notice root: wireless-mod-rt: AP not associated ... sleeping for 10 sec
Jan  1 03:03:34 wdtv user.notice root: wireless-mod-rt: AP not associated ... sleeping for 10 sec
Jan  1 03:00:43 wdtv syslog.info syslogd started: BusyBox v1.10.0
Jan  1 03:00:43 wdtv user.notice kernel: klogd started: BusyBox v1.10.0 (2009-02-15 05:09:42 CST)
Jan  1 03:00:43 wdtv user.notice kernel: Linux version 2.6.15-TvDock (andy@SVN-server) (gcc version 4.0.4) #6 PREEMPT Fri Feb 27 20:09:23 CST 2009
Jan  1 03:00:43 wdtv user.warn kernel: Configured for SMP863x (revision ES6+/RevA+), detected SMP8635 (revision ES9/RevC).
Jan  1 03:00:43 wdtv user.warn kernel: Detected CPU/System/DSP Frequencies: 297.00/198.00/297.00MHz
Jan  1 03:00:43 wdtv user.info kernel: SMP863x/SMP865x Enabled Devices under Linux/XENV 0x48000000 = 0x00023efe
Jan  1 03:00:43 wdtv user.info kernel:  BM/IDE PCIHost Ethernet IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SCARD
Jan  1 03:00:43 wdtv user.warn kernel: Valid MEMCFG found at 0x10000fc0.
Jan  1 03:00:43 wdtv user.warn kernel: CPU revision is: 00019069
Jan  1 03:00:43 wdtv user.warn kernel: Determined physical RAM map:
Jan  1 03:00:43 wdtv user.warn kernel:  memory: 06fe0000 @ 10020000 (usable)
Jan  1 03:00:43 wdtv user.debug kernel: On node 0 totalpages: 94208
Jan  1 03:00:43 wdtv user.debug kernel:   DMA zone: 94208 pages, LIFO batch:31
Jan  1 03:00:43 wdtv user.notice root: Displaying detected USB devices...
Jan  1 03:00:43 wdtv user.debug kernel:   DMA32 zone: 0 pages, LIFO batch:0
Jan  1 03:00:44 wdtv user.debug kernel:   Normal zone: 0 pages, LIFO batch:0
Jan  1 03:00:44 wdtv user.notice root:  [07d1:3c07] 1-2( 2.00,480m) 802.11 bg WLAN
Jan  1 03:00:44 wdtv user.debug kernel:   HighMem zone: 0 pages, LIFO batch:0
Jan  1 03:00:44 wdtv user.notice root:  [1043:8006] 2-1( 1.10,12m) Flash Drive
Jan  1 03:00:45 wdtv user.warn kernel: Built 1 zonelists
Jan  1 03:00:45 wdtv user.notice root:  [0000:0000] usb1( 2.00,480m) TangoX USB 2.0/tangox-ehci-hcd
Jan  1 03:00:45 wdtv user.notice kernel: Kernel command line: console=ttyS0
Jan  1 03:00:45 wdtv user.notice root:  [0000:0000] usb2( 1.10,12m) USB Host Controller/TANGOX OHCI
Jan  1 03:00:45 wdtv user.warn kernel: Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Jan  1 03:00:46 wdtv user.warn kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Jan  1 03:00:46 wdtv daemon.info utelnetd[523]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Jan  1 03:00:46 wdtv user.warn kernel: Synthesized TLB refill handler (20 instructions).
Jan  1 03:00:46 wdtv user.warn kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan  1 03:00:47 wdtv user.notice root: ***crazymounter
Jan  1 03:00:47 wdtv user.warn kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan  1 03:00:47 wdtv user.notice root: INIT: mounting app binaries...
Jan  1 03:00:47 wdtv user.warn kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan  1 03:00:48 wdtv user.notice root: Mounting /boot/log-saver.app.bin at /apps/log-saver
Jan  1 03:00:48 wdtv user.warn kernel: PID hash table entries: 2048 (order: 11, 32768 bytes)
Jan  1 03:00:48 wdtv user.warn kernel: Using 148.500 MHz high precision timer.
Jan  1 03:00:48 wdtv user.warn kernel: Console: colour dummy device 80x25
Jan  1 03:00:49 wdtv user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan  1 03:00:50 wdtv user.notice root: Mounting /boot/wireless-mod-rt.app.bin at /apps/wireless-mod-rt
Jan  1 03:00:50 wdtv user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan  1 03:00:50 wdtv user.info kernel: Memory: 107776k/114560k available (2635k kernel code, 6776k reserved, 392k data, 252k init, 0k highmem)
Jan  1 03:00:50 wdtv user.debug kernel: Calibrating delay loop... 291.84 BogoMIPS (lpj=145920)
Jan  1 03:00:52 wdtv user.warn kernel: Mount-cache hash table entries: 512
Jan  1 03:00:52 wdtv user.warn kernel: Checking for 'wait' instruction...  available.
Jan  1 03:00:52 wdtv user.notice root: Path set to /apps/wireless-mod-rt/bin:/boot/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
Jan  1 03:00:52 wdtv user.info kernel: NET: Registered protocol family 16
Jan  1 03:00:55 wdtv user.warn kernel: tangox: creating TLB mapping for 0x20000000 at 0xc0000000, size 0x04000000.
Jan  1 03:00:55 wdtv user.warn kernel: PCI: Initializing SMP863x/SMP865x PCI host controller
Jan  1 03:00:55 wdtv user.warn kernel: PCI: Remapped PCI I/O space 0x58000000 to 0xc4020000, size 64 kB
Jan  1 03:00:56 wdtv user.notice root: vfat: Waiting for 682D-30B4 to mount
Jan  1 03:00:56 wdtv authpriv.info dropbear[721]: Running in background
Jan  1 03:00:58 wdtv user.warn kernel: PCI: Remapped PCI config space 0x50000000 to 0xc4004000, size 10 kB
Jan  1 03:00:59 wdtv user.notice root: Polling detected drives...
Jan  1 03:00:59 wdtv user.warn kernel: PCI: Configured SMP863x/SMP865x as PCI slave with 128MB PCI memory
Jan  1 03:01:00 wdtv user.notice root: Waiting for /dev/sda to come online (UUID=682D-30B4)...
Jan  1 03:01:00 wdtv user.warn kernel: PCI: Region size is 16384KB
Jan  1 03:01:00 wdtv user.warn kernel: PCI: Map DMA memory 0x10020000-0x17000000 for PCI at 0x11000000
Jan  1 03:01:01 wdtv user.notice kernel: SCSI subsystem initialized
Jan  1 03:01:01 wdtv user.info kernel: usbcore: registered new driver usbfs
Jan  1 03:01:01 wdtv user.info kernel: usbcore: registered new driver hub
Jan  1 03:01:01 wdtv user.warn kernel: Created /proc/cpucache_info entry.
Jan  1 03:01:02 wdtv user.info kernel: NTFS driver 2.1.25 [Flags: R/O].
Jan  1 03:01:02 wdtv user.warn kernel: fuse init (API version 7.3)
Jan  1 03:01:03 wdtv user.info kernel: Initializing Cryptographic API
Jan  1 03:01:04 wdtv user.info kernel: io scheduler noop registered
Jan  1 03:01:05 wdtv user.info kernel: io scheduler anticipatory registered
Jan  1 03:01:06 wdtv user.info kernel: io scheduler deadline registered
Jan  1 03:01:06 wdtv user.info kernel: io scheduler cfq registered
Jan  1 03:01:07 wdtv user.info kernel: SMP86xx ir (254:0): driver loaded (wait_period = 300ms, buffer_size = 2)
Jan  1 03:01:07 wdtv user.info kernel: SMP86xx led_rst (253:0): driver loaded.
Jan  1 03:01:07 wdtv user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Jan  1 03:01:08 wdtv user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
Jan  1 03:01:08 wdtv user.info kernel: serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A
Jan  1 03:01:09 wdtv user.info kernel: loop: loaded (max 8 devices)
Jan  1 03:01:09 wdtv user.notice kernel: physmap flash device CS2: 1000000 at 48000000
Jan  1 03:01:10 wdtv user.info kernel: CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Jan  1 03:01:11 wdtv user.warn kernel:  Amd/Fujitsu Extended Query Table at 0x0040
Jan  1 03:01:12 wdtv user.notice kernel: number of CFI chips: 1
Jan  1 03:01:12 wdtv user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan  1 03:01:12 wdtv user.notice kernel: Using physmap partition definition
Jan  1 03:01:12 wdtv user.notice kernel: Adding partition #1-#5
Jan  1 03:01:13 wdtv user.notice kernel: Creating 5 MTD partitions on "CS2: Physically mapped flash":
Jan  1 03:01:13 wdtv user.notice kernel: 0x00000000-0x00060000 : "CS2-Part1"
Jan  1 03:01:13 wdtv user.notice kernel: 0x00060000-0x00280000 : "CS2-Part2"
Jan  1 03:01:14 wdtv user.notice kernel: 0x00280000-0x00fc0000 : "CS2-Part3"
Jan  1 03:01:14 wdtv user.notice kernel: 0x00fc0000-0x00fe0000 : "CS2-Part4"
Jan  1 03:01:16 wdtv user.notice kernel: 0x00fe0000-0x01000000 : "CS2-Part5"
Jan  1 03:01:17 wdtv user.notice kernel: physmap flash device CS3: 4000000 at 4c000000
Jan  1 03:01:17 wdtv user.debug kernel: CFI: Found no CS3: Physically mapped flash device at location zero
Jan  1 03:01:18 wdtv user.warn kernel: driver tangox-ehci-hcd, 10 Dec 2004
Jan  1 03:01:18 wdtv user.warn kernel: TangoX USB initializing...
Jan  1 03:01:18 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
Jan  1 03:01:18 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
Jan  1 03:01:18 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021500
Jan  1 03:01:19 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
Jan  1 03:01:19 wdtv user.info kernel: hub 1-0:1.0: USB hub found
Jan  1 03:01:19 wdtv user.info kernel: hub 1-0:1.0: 2 ports detected
Jan  1 03:01:19 wdtv user.warn kernel: TangoX USB was initialized.
Jan  1 03:01:19 wdtv user.warn kernel: Initializing TangoX US
Jan  1 03:01:19 wdtv user.info kernel: B OHCI Controller Membase=0xa0021500, irq=47
Jan  1 03:01:20 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
Jan  1 03:01:20 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
Jan  1 03:01:20 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
Jan  1 03:01:21 wdtv user.info kernel: hub 2-0:1.0: USB hub found
Jan  1 03:01:21 wdtv user.info kernel: hub 2-0:1.0: 2 ports detected
Jan  1 03:01:21 wdtv user.info kernel: Initializing USB Mass Storage driver...
Jan  1 03:01:21 wdtv user.info kernel: usb 1-2: new high speed USB device using tangox-ehci-hcd and address 3
Jan  1 03:01:21 wdtv user.info kernel: usbcore: registered new driver usb-storage
Jan  1 03:01:22 wdtv user.info kernel: USB Mass Storage support registered.
Jan  1 03:01:22 wdtv user.info kernel: NET: Registered protocol family 2
Jan  1 03:01:22 wdtv user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 03:01:22 wdtv user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan  1 03:01:22 wdtv user.warn kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Jan  1 03:01:23 wdtv user.info kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jan  1 03:01:24 wdtv user.info kernel: TCP reno registered
Jan  1 03:01:24 wdtv user.info kernel: TCP bic registered
Jan  1 03:01:24 wdtv user.info kernel: NET: Registered protocol family 1
Jan  1 03:01:24 wdtv user.info kernel: NET: Registered protocol family 17
Jan  1 03:01:25 wdtv user.info kernel: Freeing unused kernel memory: 252k freed
Jan  1 03:01:25 wdtv user.info kernel: usb 2-1: new full speed USB device using tangox-ohci-hcd and address 2
Jan  1 03:01:25 wdtv user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan  1 03:01:25 wdtv user.debug kernel: usb-storage: device found at 2
Jan  1 03:01:25 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan  1 03:01:26 wdtv user.notice kernel:   Vendor: Generic   Model: USB Flash Drive   Rev:     
Jan  1 03:01:27 wdtv user.notice root: wireless-mod-rt: Starting..
Jan  1 03:01:28 wdtv user.notice kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
Jan  1 03:01:29 wdtv user.notice kernel: SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
Jan  1 03:01:29 wdtv user.notice kernel: sda: Write Protect is off
Jan  1 03:01:29 wdtv user.debug kernel: sda: Mode Sense: 0b 00 00 08
Jan  1 03:01:29 wdtv user.err kernel: sda: assuming drive cache: write through
Jan  1 03:01:30 wdtv user.notice kernel: SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
Jan  1 03:01:30 wdtv user.notice kernel: sda: Write Protect is off
Jan  1 03:01:30 wdtv user.debug kernel: sda: Mode Sense: 0b 00 00 08
Jan  1 03:01:30 wdtv user.err kernel: sda: assuming drive cache: write through
Jan  1 03:01:31 wdtv user.info kernel:  sda: unknown partition table
Jan  1 03:01:31 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi removable disk sda
Jan  1 03:01:31 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan  1 03:01:32 wdtv user.debug kernel: usb-storage: device scan complete
Jan  1 03:01:32 wdtv user.info kernel: kjournald starting.  Commit interval 5 seconds
Jan  1 03:01:33 wdtv user.info kernel: EXT3 FS on loop1, internal journal
Jan  1 03:01:33 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan  1 03:01:33 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan  1 03:01:33 wdtv user.warn kernel: llad: module license 'LGPL' taints kernel.
Jan  1 03:01:34 wdtv user.warn kernel: em8xxx: no version for "llad_open" found: kernel tainted.
Jan  1 03:01:35 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1.03.01/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1463] init_module: begun
Jan  1 03:01:35 wdtv user.warn kernel: em8xxx0 [/home/andy/WDTV/house_1.03.01/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1346] identify: board as unknown subid
Jan  1 03:01:35 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1.03.01/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1449] identify: device 0x8635 0x86 accepted with software tango2revC
Jan  1 03:01:36 wdtv user.warn kernel: mumk_register_tasklet: (0) tasklet c401e000 status @c938aa24
Jan  1 03:01:36 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1.03.01/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1581] init_module: done. Found 1 em8xxx
Jan  1 03:01:37 wdtv user.info kernel: kjournald starting.  Commit interval 5 seconds
Jan  1 03:01:37 wdtv user.info kernel: EXT3 FS on loop2, internal journal
Jan  1 03:01:37 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan  1 03:01:37 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan  1 03:01:37 wdtv user.info kernel: SMP86xx ir (252:0): driver loaded (wait_period = 100ms, buffer_size = 6)
Jan  1 03:01:37 wdtv user.warn kernel: SMP86xx fip (251:0): driver loaded (buffer_size = 2)
Jan  1 03:01:38 wdtv user.warn kernel: cdrom: No versions for exported symbols. Tainting kernel.
Jan  1 03:01:38 wdtv user.warn kernel: mii: No versions for exported symbols. Tainting kernel.
Jan  1 03:01:38 wdtv user.warn kernel: usbnet: No versions for exported symbols. Tainting kernel.
Jan  1 03:01:38 wdtv user.info kernel: usbcore: registered new driver asix
Jan  1 03:01:39 wdtv user.info kernel: /home/Zehd/wdtv/dm9601/dm9601.c: /home/Zehd/wdtv/dm9601/dm9601.c: v0.0.6 2001/05/24 (C) 1999-2000 Petko Manolov (petkan@dce.bg)
Jan  1 03:01:39 wdtv user.info kernel: usbcore: registered new driver dm9601
Jan  1 03:01:39 wdtv user.info kernel: usbcore: registered new driver kaweth
Jan  1 03:01:39 wdtv user.info kernel: usbcore: registered new driver MOSCHIP usb-ethernet driver
Jan  1 03:01:40 wdtv user.info kernel: pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
Jan  1 03:01:40 wdtv user.info kernel: usbcore: registered new driver pegasus
Jan  1 03:01:40 wdtv user.info kernel: usbcore: registered new driver catc
Jan  1 03:01:40 wdtv user.notice root: wireless-mod-rt: WLAN_LOAD=rt73.ko, config=/boot/rt73sta.dat
Jan  1 03:01:40 wdtv user.info kernel: drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
Jan  1 03:01:41 wdtv user.notice root: wireless-mod-rt: Copying /boot/rt73sta.dat to /etc
Jan  1 03:01:41 wdtv user.info kernel: drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
Jan  1 03:01:42 wdtv user.info kernel: usbcore: registered new driver rtl8150
Jan  1 03:01:42 wdtv user.warn kernel: cdc_ether: No versions for exported symbols. Tainting kernel.
Jan  1 03:01:42 wdtv user.info kernel: usbcore: registered new driver cdc_ether
Jan  1 03:01:42 wdtv user.info kernel: usbcore: registered new driver cdc_subset
Jan  1 03:01:43 wdtv user.info kernel: usbcore: registered new driver net1080
Jan  1 03:01:43 wdtv user.notice root: wireless-mod-rt: Installing rt73.ko firmware
Jan  1 03:01:43 wdtv user.info kernel: usbcore: registered new driver plusb
Jan  1 03:01:43 wdtv user.notice root: wireless-mod-rt: Install modules /apps/wireless-mod-rt/modules/rt73.ko
Jan  1 03:01:44 wdtv user.info kernel: usbcore: registered new driver rndis_host
Jan  1 03:01:45 wdtv user.info kernel: usbcore: registered new driver gl620a
Jan  1 03:01:45 wdtv user.notice root: wireless-mod-rt: hotplug action=add
Jan  1 03:01:45 wdtv user.warn kernel: wireless_ext: No versions for exported symbols. Tainting kernel.
Jan  1 03:01:46 wdtv user.info kernel: Loading wireless extentions module...
Jan  1 03:01:47 wdtv user.warn kernel: idVendor = 0x7d1, idProduct = 0x3c07 
Jan  1 03:01:47 wdtv user.info kernel: usbcore: registered new driver rt73
Jan  1 03:01:54 wdtv daemon.notice statd[1977]: Version 1.1.5 Starting
Jan  1 03:01:54 wdtv daemon.notice statd[1977]: statd running as root. chown /tmp/nfs/sm to choose different user
Jan  1 03:01:59 wdtv user.notice root: wireless-mod-rt: Bringing up wireless device 'rausb0'...
Jan  1 03:02:00 wdtv user.warn kernel: => usb_rtusb_open
Jan  1 03:02:00 wdtv user.notice root: wireless-mod-rt: Waiting for AP association...
Jan  1 03:02:01 wdtv user.debug kernel: rausb0 (WE) : Driver using old /proc/net/wireless support, please fix driver !
Jan  1 03:02:01 wdtv user.notice root: wireless-mod-rt: AP not associated ... sleeping for 10 sec
Jan  1 03:02:05 wdtv user.debug kernel: ir: Enable NEC decoder (0x00000000)
Jan  1 03:02:05 wdtv user.debug kernel: ir: Enable RC5 decoder (0x80001e00)
Jan  1 03:02:11 wdtv user.notice root: wireless-mod-rt: AP not associated ... sleeping for 10 sec
Jan  1 03:02:16 wdtv user.notice root: xmounter: entering stage2
Jan  1 03:02:16 wdtv user.notice root: Now mounted:
Jan  1 03:02:16 wdtv user.notice root: rootfs on / type rootfs (rw)
Jan  1 03:02:16 wdtv user.notice root: proc on /proc type proc (rw,nodiratime)
Jan  1 03:02:16 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan  1 03:02:16 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan  1 03:02:16 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan  1 03:02:16 wdtv user.notice root: /dev/sda on /boot type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan  1 03:02:16 wdtv user.notice root: /dev/loop1 on / type ext3 (rw,noatime,nodiratime,data=ordered)
Jan  1 03:02:16 wdtv user.notice root: none on /proc type proc (rw,nodiratime)
Jan  1 03:02:16 wdtv user.notice root: usb on /proc/bus/usb type usbfs (rw)
Jan  1 03:02:16 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan  1 03:02:16 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan  1 03:02:16 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan  1 03:02:16 wdtv user.notice root: none on /tmp type tmpfs (rw)
Jan  1 03:02:17 wdtv user.notice root: none on /apps type tmpfs (rw)
Jan  1 03:02:17 wdtv user.notice root: /dev/loop0 on /apps/log-saver type cramfs (ro)
Jan  1 03:02:17 wdtv user.notice root: /dev/loop2 on /apps/wireless-mod-rt type ext3 (rw,data=ordered)
Jan  1 03:02:17 wdtv user.notice root: /dev/sda0 on /tmp/media/usb/USB1/682D-30B4 type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan  1 03:02:21 wdtv user.notice root: wireless-mod-rt: AP not associated ... sleeping for 10 sec
Jan  1 03:02:31 wdtv user.notice root: wireless-mod-rt: AP not associated ... sleeping for 10 sec
Jan  1 03:02:42 wdtv user.notice root: wireless-mod-rt: AP not associated ... sleeping for 10 sec
Jan  1 03:02:52 wdtv user.notice root: wireless-mod-rt: AP not associated ... sleeping for 10 sec
Jan  1 03:03:02 wdtv user.notice root: wireless-mod-rt: AP not associated ... sleeping for 10 sec
Jan  1 03:03:12 wdtv user.notice root: wireless-mod-rt: AP not associated ... sleeping for 10 sec
Jan  1 03:03:22 wdtv user.notice root: wireless-mod-rt: AP not associated ... sleeping for 10 sec
Jan  1 03:03:32 wdtv user.notice root: wireless-mod-rt: AP not associated ... sleeping for 10 sec
log_ifconfig.txt
код:
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 
   
rausb0    Link encap:Ethernet  HWaddr 00:22:B0:58:F7:D5  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
Правда сейчас после установки 1.03.01_ext3-boot_0.9.2_lilibabe6x2_big_ru_eldrako +wireless-mod-rt.app.bin-1.2.4 + rt73sta.dat на брелке индикация появилась,
но почему-то не видно было самого процесса установки прошивки?

1934. Pavel-rakun, 12.12.2009 18:10
[q]El'Drako:
Pavel-rakun
но почему-то не видно было самого процесса установки прошивки?
эээ, а зачем он вам? эта прошивка не прошивается - её загрузку я описывал в ветке чуть ранее (2-5 страниц).

по логам у тебя не проходит авторизация на точке доступа, поэтому конфиги вэдешки никакие не трогай, кроме пароля. И стоит тебе помучать точку доступа.

Спасибо большое за советы! А где конкретно видно, что авторизация не проходит?
И как помучать эту точку доступа? Наверное проще другую применить?

1936. Pavel-rakun, 12.12.2009 19:08
С прошивкой 1.01.02.ext3-boot.0.8.7.2 и wireless-mod.app.bin
таким net.config
код:
 HOST=wdtv
 
ifconfig $MDEV up
     
sleep 1
iwconfig $MDEV essid wdtvlan rate auto mode Managed channel auto
sleep 1
iwconfig commit
sleep 5
     
# if you do not set a hostname,a random one is assigned. 
# attempt to set jumbo frames
#MTU=9000
# Your other computers should have same MTU or it will break NFS
     
# Dynamic IP Configuration:
#DHCP=yes
#
# Static IP Configuration:  (only if not DHCP)
DHCP=no
IP=192.168.1.8       #адрес устройства
     
GW=192.168.1.11       #шлюз
NM=255.255.255.0
DNS1=192.168.1.11
Получается вот так :
код:
Jan  1 00:00:37 wdtv syslog.info syslogd started: BusyBox v1.10.0
Jan  1 00:00:37 wdtv user.notice kernel: klogd started: BusyBox v1.10.0 (2009-02-15 05:09:42 CST)
Jan  1 00:00:37 wdtv user.notice kernel: Linux version 2.6.15-TvDock (andy@SVN-server) (gcc version 4.0.4) #6 PREEMPT Fri Feb 27 20:09:23 CST 2009
Jan  1 00:00:37 wdtv user.warn kernel: Configured for SMP863x (revision ES6+/RevA+), detected SMP8635 (revision ES9/RevC).
Jan  1 00:00:37 wdtv user.warn kernel: Detected CPU/System/DSP Frequencies: 297.00/198.00/297.00MHz
Jan  1 00:00:37 wdtv user.info kernel: SMP863x/SMP865x Enabled Devices under Linux/XENV 0x48000000 = 0x00023efe
Jan  1 00:00:37 wdtv user.info kernel:  BM/IDE PCIHost Ethernet IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SCARD
Jan  1 00:00:37 wdtv user.warn kernel: Valid MEMCFG found at 0x10000fc0.
Jan  1 00:00:37 wdtv user.warn kernel: CPU revision is: 00019069
Jan  1 00:00:37 wdtv user.warn kernel: Determined physical RAM map:
Jan  1 00:00:37 wdtv user.warn kernel:  memory: 06fe0000 @ 10020000 (usable)
Jan  1 00:00:37 wdtv user.debug kernel: On node 0 totalpages: 94208
Jan  1 00:00:37 wdtv user.debug kernel:   DMA zone: 94208 pages, LIFO batch:31
Jan  1 00:00:37 wdtv user.notice root: Displaying detected USB devices...
Jan  1 00:00:37 wdtv user.debug kernel:   DMA32 zone: 0 pages, LIFO batch:0
Jan  1 00:00:37 wdtv user.notice root:  [07d1:3c07] 1-2( 2.00,480m) 802.11 bg WLAN
Jan  1 00:00:37 wdtv user.debug kernel:   Normal zone: 0 pages, LIFO batch:0
Jan  1 00:00:38 wdtv user.notice root:  [1043:8006] 2-1( 1.10,12m) Flash Drive
Jan  1 00:00:38 wdtv user.debug kernel:   HighMem zone: 0 pages, LIFO batch:0
Jan  1 00:00:38 wdtv user.warn kernel: Built 1 zonelists
Jan  1 00:00:38 wdtv user.notice root:  [0000:0000] usb1( 2.00,480m) TangoX USB 2.0/tangox-ehci-hcd
Jan  1 00:00:38 wdtv user.notice kernel: Kernel command line: console=ttyS0
Jan  1 00:00:38 wdtv user.notice root:  [0000:0000] usb2( 1.10,12m) USB Host Controller/TANGOX OHCI
Jan  1 00:00:39 wdtv user.warn kernel: Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Jan  1 00:00:39 wdtv user.warn kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Jan  1 00:00:40 wdtv user.warn kernel: Synthesized TLB refill handler (20 instructions).
Jan  1 00:00:40 wdtv daemon.info utelnetd[515]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Jan  1 00:00:40 wdtv user.warn kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan  1 00:00:40 wdtv user.warn kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan  1 00:00:40 wdtv user.notice root: INIT: mounting app binaries...
Jan  1 00:00:41 wdtv user.warn kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan  1 00:00:41 wdtv user.notice root: Mounting /boot/log-saver.app.bin at /apps/log-saver
Jan  1 00:00:41 wdtv user.warn kernel: PID hash table entries: 2048 (order: 11, 32768 bytes)
Jan  1 00:00:41 wdtv user.warn kernel: Using 148.500 MHz high precision timer.
Jan  1 00:00:42 wdtv user.warn kernel: Console: colour dummy device 80x25
Jan  1 00:00:42 wdtv user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan  1 00:00:43 wdtv user.notice root: Mounting /boot/wireless-mod.app.bin at /apps/wireless-mod
Jan  1 00:00:43 wdtv user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan  1 00:00:44 wdtv user.info kernel: Memory: 107776k/114560k available (2635k kernel code, 6776k reserved, 392k data, 252k init, 0k highmem)
Jan  1 00:00:44 wdtv user.debug kernel: Calibrating delay loop... 291.84 BogoMIPS (lpj=145920)
Jan  1 00:00:44 wdtv user.warn kernel: Mount-cache hash table entries: 512
Jan  1 00:00:45 wdtv user.warn kernel: Checking for 'wait' instruction...  available.
Jan  1 00:00:45 wdtv user.info kernel: NET: Registered protocol family 16
Jan  1 00:00:45 wdtv user.warn kernel: tangox: creating TLB mapping for 0x20000000 at 0xc0000000, size 0x04000000.
Jan  1 00:00:46 wdtv user.warn kernel: PCI: Initializing SMP863x/SMP865x PCI host controller
Jan  1 00:00:46 wdtv user.warn kernel: PCI: Remapped PCI I/O space 0x58000000 to 0xc4020000, size 64 kB
Jan  1 00:00:46 wdtv user.notice root: Path set to /apps/wireless-mod/bin:/boot/bin:/opt/bin:/usr/sbin:/usr/bin:/sbin:/bin
Jan  1 00:00:46 wdtv user.warn kernel: PCI: Remapped PCI config space 0x50000000 to 0xc4004000, size 10 kB
Jan  1 00:00:47 wdtv user.notice root: INIT: Starting /etc/init.d/rcS
Jan  1 00:00:47 wdtv user.warn kernel: PCI: Configured SMP863x/SMP865x as PCI slave with 128MB PCI memory
Jan  1 00:00:49 wdtv user.notice root: vfat: Waiting for 7C5D-D3E7 to mount
Jan  1 00:00:50 wdtv user.warn kernel: PCI: Region size is 16384KB
Jan  1 00:00:50 wdtv user.notice root: Polling detected drives...
Jan  1 00:00:51 wdtv user.warn kernel: PCI: Map DMA memory 0x10020000-0x17000000 for PCI at 0x11000000
Jan  1 00:00:51 wdtv user.notice root: Waiting for /dev/sda to come online (UUID=7C5D-D3E7)...
Jan  1 00:00:51 wdtv authpriv.info dropbear[747]: Running in background
Jan  1 00:00:53 wdtv user.notice kernel: SCSI subsystem initialized
Jan  1 00:00:55 wdtv user.info kernel: usbcore: registered new driver usbfs
Jan  1 00:00:55 wdtv user.info kernel: usbcore: registered new driver hub
Jan  1 00:00:56 wdtv user.warn kernel: Created /proc/cpucache_info entry.
Jan  1 00:00:56 wdtv user.info kernel: NTFS driver 2.1.25 [Flags: R/O].
Jan  1 00:00:56 wdtv user.warn kernel: fuse init (API version 7.3)
Jan  1 00:00:56 wdtv user.info kernel: Initializing Cryptographic API
Jan  1 00:00:57 wdtv user.info kernel: io scheduler noop registered
Jan  1 00:00:57 wdtv user.info kernel: io scheduler anticipatory registered
Jan  1 00:00:57 wdtv user.info kernel: io scheduler deadline registered
Jan  1 00:00:58 wdtv user.info kernel: io scheduler cfq registered
Jan  1 00:00:58 wdtv user.info kernel: SMP86xx ir (254:0): driver loaded (wait_period = 300ms, buffer_size = 2)
Jan  1 00:00:58 wdtv user.info kernel: SMP86xx led_rst (253:0): driver loaded.
Jan  1 00:01:00 wdtv user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Jan  1 00:01:01 wdtv user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
Jan  1 00:01:01 wdtv user.info kernel: serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A
Jan  1 00:01:02 wdtv user.info kernel: loop: loaded (max 8 devices)
Jan  1 00:01:02 wdtv user.notice kernel: physmap flash device CS2: 1000000 at 48000000
Jan  1 00:01:02 wdtv user.info kernel: CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Jan  1 00:01:03 wdtv user.warn kernel:  Amd/Fujitsu Extended Query Table at 0x0040
Jan  1 00:01:04 wdtv user.notice kernel: number of CFI chips: 1
Jan  1 00:01:04 wdtv user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan  1 00:01:04 wdtv user.notice kernel: Using physmap partition definition
Jan  1 00:01:05 wdtv user.notice kernel: Adding partition #1-#5
Jan  1 00:01:05 wdtv user.notice kernel: Creating 5 MTD partitions on "CS2: Physically mapped flash":
Jan  1 00:01:05 wdtv user.notice kernel: 0x00000000-0x00060000 : "CS2-Part1"
Jan  1 00:01:07 wdtv user.notice kernel: 0x00060000-0x00280000 : "CS2-Part2"
Jan  1 00:01:07 wdtv user.notice kernel: 0x00280000-0x00fc0000 : "CS2-Part3"
Jan  1 00:01:07 wdtv user.notice kernel: 0x00fc0000-0x00fe0000 : "CS2-Part4"
Jan  1 00:01:08 wdtv user.notice kernel: 0x00fe0000-0x01000000 : "CS2-Part5"
Jan  1 00:01:08 wdtv user.notice kernel: physmap flash device CS3: 4000000 at 4c000000
Jan  1 00:01:08 wdtv user.debug kernel: CFI: Found no CS3: Physically mapped flash device at location zero
Jan  1 00:01:09 wdtv user.warn kernel: driver tangox-ehci-hcd, 10 Dec 2004
Jan  1 00:01:09 wdtv user.warn kernel: TangoX USB initializing...
Jan  1 00:01:09 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
Jan  1 00:01:09 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
Jan  1 00:01:10 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021500
Jan  1 00:01:11 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
Jan  1 00:01:14 wdtv user.info kernel: hub 1-0:1.0: USB hub found
Jan  1 00:01:14 wdtv user.info kernel: hub 1-0:1.0: 2 ports detected
Jan  1 00:01:14 wdtv user.warn kernel: TangoX USB was initialized.
Jan  1 00:01:14 wdtv user.warn kernel: Initializing TangoX US
Jan  1 00:01:14 wdtv user.info kernel: B OHCI Controller Membase=0xa0021500, irq=47
Jan  1 00:01:15 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
Jan  1 00:01:15 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
Jan  1 00:01:15 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
Jan  1 00:01:15 wdtv user.info kernel: hub 2-0:1.0: USB hub found
Jan  1 00:01:16 wdtv user.info kernel: hub 2-0:1.0: 2 ports detected
Jan  1 00:01:16 wdtv user.info kernel: Initializing USB Mass Storage driver...
Jan  1 00:01:16 wdtv user.info kernel: usb 1-2: new high speed USB device using tangox-ehci-hcd and address 3
Jan  1 00:01:19 wdtv user.info kernel: usbcore: registered new driver usb-storage
Jan  1 00:01:19 wdtv user.info kernel: USB Mass Storage support registered.
Jan  1 00:01:19 wdtv user.info kernel: NET: Registered protocol family 2
Jan  1 00:01:20 wdtv user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 00:01:20 wdtv user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan  1 00:01:20 wdtv user.warn kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Jan  1 00:01:21 wdtv user.info kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jan  1 00:01:21 wdtv user.info kernel: TCP reno registered
Jan  1 00:01:21 wdtv user.info kernel: TCP bic registered
Jan  1 00:01:21 wdtv user.info kernel: NET: Registered protocol family 1
Jan  1 00:01:22 wdtv user.info kernel: NET: Registered protocol family 17
Jan  1 00:01:22 wdtv user.info kernel: Freeing unused kernel memory: 252k freed
Jan  1 00:01:23 wdtv user.notice root: net.agent: Called for rausb0
Jan  1 00:01:23 wdtv user.info kernel: usb 2-1: new full speed USB device using tangox-ohci-hcd and address 2
Jan  1 00:01:24 wdtv user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan  1 00:01:25 wdtv user.debug kernel: usb-storage: device found at 2
Jan  1 00:01:26 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan  1 00:01:26 wdtv user.notice kernel:   Vendor: Generic   Model: USB Flash Drive   Rev:     
Jan  1 00:01:26 wdtv user.notice kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
Jan  1 00:01:32 wdtv user.notice kernel: SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
Jan  1 00:01:32 wdtv user.notice root: net.agent: Using /boot/net.config: DHCP=no IP=192.168.1.8 GW=192.168.1.11
Jan  1 00:01:32 wdtv user.notice kernel: sda: Write Protect is off
Jan  1 00:01:36 wdtv user.notice root: Testing static IP assignment...
Jan  1 00:01:36 wdtv daemon.notice statd[1874]: Version 1.1.5 Starting
Jan  1 00:01:38 wdtv user.debug kernel: sda: Mode Sense: 0b 00 00 08
Jan  1 00:01:39 wdtv daemon.notice statd[1874]: statd running as root. chown /tmp/nfs/sm to choose different user
Jan  1 00:01:41 wdtv user.err kernel: sda: assuming drive cache: write through
Jan  1 00:01:42 wdtv user.notice kernel: SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
Jan  1 00:01:42 wdtv user.notice kernel: sda: Write Protect is off
Jan  1 00:01:42 wdtv user.debug kernel: sda: Mode Sense: 0b 00 00 08
Jan  1 00:01:42 wdtv user.err kernel: sda: assuming drive cache: write through
Jan  1 00:01:42 wdtv user.info kernel:  sda: unknown partition table
Jan  1 00:01:43 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi removable disk sda
Jan  1 00:01:43 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan  1 00:01:43 wdtv user.debug kernel: usb-storage: device scan complete
Jan  1 00:01:44 wdtv user.info kernel: kjournald starting.  Commit interval 5 seconds
Jan  1 00:01:44 wdtv user.info kernel: EXT3 FS on loop1, internal journal
Jan  1 00:01:45 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan  1 00:01:45 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan  1 00:01:45 wdtv user.info kernel: attempt to access beyond end of device
Jan  1 00:01:45 wdtv user.info kernel: loop0: rw=0, want=68, limit=8
Jan  1 00:01:46 wdtv user.info kernel: attempt to access beyond end of device
Jan  1 00:01:47 wdtv user.info kernel: loop0: rw=0, want=1028, limit=8
Jan  1 00:01:48 wdtv user.info kernel: attempt to access beyond end of device
Jan  1 00:01:48 wdtv user.info kernel: loop0: rw=0, want=12, limit=8
Jan  1 00:01:48 wdtv user.info kernel: attempt to access beyond end of device
Jan  1 00:01:48 wdtv user.info kernel: loop0: rw=0, want=1028, limit=8
Jan  1 00:01:49 wdtv user.info kernel: attempt to access beyond end of device
Jan  1 00:01:49 wdtv user.info kernel: loop0: rw=0, want=12, limit=8
Jan  1 00:01:51 wdtv user.info kernel: attempt to access beyond end of device
Jan  1 00:01:51 wdtv user.info kernel: loop0: rw=0, want=1252, limit=8
Jan  1 00:01:51 wdtv user.info kernel: attempt to access beyond end of device
Jan  1 00:01:51 wdtv user.info kernel: loop0: rw=0, want=1028, limit=8
Jan  1 00:01:52 wdtv user.warn kernel: UDF-fs: No partition found (1)
Jan  1 00:01:52 wdtv user.warn kernel: UDF-fs: No VRS found
Jan  1 00:01:52 wdtv user.warn kernel: irkernel: no version for "struct_module" found: kernel tainted.
Jan  1 00:01:53 wdtv user.info kernel: SMP86xx ir (252:0): driver loaded (wait_period = 100ms, buffer_size = 6)
Jan  1 00:01:53 wdtv user.warn kernel: SMP86xx fip (251:0): driver loaded (buffer_size = 2)
Jan  1 00:01:53 wdtv user.warn kernel: fuse init (API version 7.8)
Jan  1 00:01:53 wdtv user.warn kernel: fuse distribution version: 2.7.4
Jan  1 00:01:53 wdtv user.info kernel: Patching open_bdev_excl...
Jan  1 00:01:54 wdtv user.notice root: Ping: 6 packets transmitted, 0 packets received, 100% packet loss
Jan  1 00:01:54 wdtv user.info kernel: Changing c029cc9 to 0.
Jan  1 00:01:55 wdtv user.notice root: IP Assignment failed. Trying DHCP
Jan  1 00:01:59 wdtv user.info kernel: Changing 2002021 to 0.
Jan  1 00:02:04 wdtv user.info kernel: Changing 2208021 to 0.
Jan  1 00:02:04 wdtv user.warn kernel: cdrom: No versions for exported symbols. Tainting kernel.
Jan  1 00:02:04 wdtv user.warn kernel: mii: No versions for exported symbols. Tainting kernel.
Jan  1 00:02:05 wdtv user.warn kernel: usbnet: No versions for exported symbols. Tainting kernel.
Jan  1 00:02:05 wdtv user.info kernel: usbcore: registered new driver asix
Jan  1 00:02:05 wdtv user.info kernel: /home/Zehd/wdtv/dm9601/dm9601.c: /home/Zehd/wdtv/dm9601/dm9601.c: v0.0.6 2001/05/24 (C) 1999-2000 Petko Manolov (petkan@dce.bg)
Jan  1 00:02:05 wdtv user.info kernel: usbcore: registered new driver dm9601
Jan  1 00:02:05 wdtv user.info kernel: usbcore: registered new driver kaweth
Jan  1 00:02:06 wdtv user.info kernel: usbcore: registered new driver MOSCHIP usb-ethernet driver
Jan  1 00:02:06 wdtv user.info kernel: pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
Jan  1 00:02:06 wdtv user.info kernel: usbcore: registered new driver pegasus
Jan  1 00:02:11 wdtv user.info kernel: usbcore: registered new driver catc
Jan  1 00:02:11 wdtv user.info kernel: drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
Jan  1 00:02:11 wdtv user.info kernel: drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
Jan  1 00:02:12 wdtv user.info kernel: usbcore: registered new driver rtl8150
Jan  1 00:02:12 wdtv user.warn kernel: cdc_ether: No versions for exported symbols. Tainting kernel.
Jan  1 00:02:12 wdtv user.info kernel: usbcore: registered new driver cdc_ether
Jan  1 00:02:13 wdtv user.info kernel: usbcore: registered new driver cdc_subset
Jan  1 00:02:13 wdtv user.info kernel: usbcore: registered new driver net1080
Jan  1 00:02:14 wdtv user.notice root: xmounter: entering stage2
Jan  1 00:02:14 wdtv user.info kernel: usbcore: registered new driver plusb
Jan  1 00:02:14 wdtv user.notice root: Now mounted:
Jan  1 00:02:14 wdtv user.info kernel: usbcore: registered new driver rndis_host
Jan  1 00:02:15 wdtv user.notice root: rootfs on / type rootfs (rw)
Jan  1 00:02:16 wdtv user.info kernel: usbcore: registered new driver gl620a
Jan  1 00:02:16 wdtv user.notice root: proc on /proc type proc (rw,nodiratime)
Jan  1 00:02:17 wdtv user.warn kernel: wireless_ext: No versions for exported symbols. Tainting kernel.
Jan  1 00:02:17 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan  1 00:02:17 wdtv user.info kernel: Loading wireless extentions module...
Jan  1 00:02:18 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan  1 00:02:18 wdtv user.warn kernel: firmware_class: No versions for exported symbols. Tainting kernel.
Jan  1 00:02:18 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan  1 00:02:18 wdtv user.info kernel: usbcore: registered new driver zd1201
Jan  1 00:02:20 wdtv user.notice root: /dev/sda on /boot type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan  1 00:02:21 wdtv user.notice kernel: ZD1211B - version 2.19.2.9
Jan  1 00:02:25 wdtv user.notice root: /dev/loop1 on / type ext3 (rw,sync,noatime,nodiratime,data=ordered)
Jan  1 00:02:25 wdtv user.info kernel: usbcore: registered new driver zd1211b
Jan  1 00:02:25 wdtv user.notice root: none on /proc type proc (rw,nodiratime)
Jan  1 00:02:26 wdtv user.notice kernel: arusb - version 0.0.0.999
Jan  1 00:02:26 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan  1 00:02:26 wdtv user.info kernel: usbcore: registered new driver Otus
Jan  1 00:02:26 wdtv user.notice root: none on /tmp type tmpfs (rw)
Jan  1 00:02:26 wdtv user.warn kernel: rt2870sta: module license 'unspecified' taints kernel.
Jan  1 00:02:27 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan  1 00:02:27 wdtv user.warn kernel: rtusb init --->
Jan  1 00:02:27 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan  1 00:02:27 wdtv user.info kernel: usbcore: registered new driver rt2870
Jan  1 00:02:28 wdtv user.notice root: none on /apps type tmpfs (rw)
Jan  1 00:02:29 wdtv user.warn kernel: idVendor = 0x7d1, idProduct = 0x3c07 
Jan  1 00:02:29 wdtv user.notice root: /dev/loop0 on /apps/log-saver type cramfs (ro)
Jan  1 00:02:29 wdtv user.info kernel: usbcore: registered new driver rt73
Jan  1 00:02:29 wdtv user.notice root: /dev/loop2 on /apps/wireless-mod type cramfs (ro)
Jan  1 00:02:30 wdtv user.warn kernel: => usb_rtusb_open
Jan  1 00:02:30 wdtv user.notice root: /dev/loop1 on /lib/modules/old-or-new type ext3 (rw,sync,noatime,nodiratime,data=ordered)
Jan  1 00:02:30 wdtv user.warn kernel: Starting OpenWDTV IR driver
Jan  1 00:02:30 wdtv user.notice root: /dev/sda0 on /tmp/media/usb/USB1/7C5D-D3E7 type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan  1 00:02:30 wdtv user.debug kernel: ir: Enable NEC decoder (0x00000000)
Jan  1 00:02:31 wdtv user.debug kernel: ir: Enable RC5 decoder (0x00000000)
Jan  1 00:02:31 wdtv user.warn kernel: OpenWDTV.ir Opened /dev/ir0(96d8d330) real IR device
Jan  1 00:02:32 wdtv user.debug kernel: rausb0 (WE) : Driver using old /proc/net/wireless support, please fix driver !
Jan  1 00:02:33 wdtv user.warn kernel: em8xxx [/home/william/WDTV/WDTV_Golden_1.00.01/core_repos/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1463] init_module: begun
Jan  1 00:02:33 wdtv user.warn kernel: em8xxx0 [/home/william/WDTV/WDTV_Golden_1.00.01/core_repos/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1346] identify: board as unknown subid
Jan  1 00:02:33 wdtv user.warn kernel: em8xxx [/home/william/WDTV/WDTV_Golden_1.00.01/core_repos/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1449] identify: device 0x8635 0x86 accepted with software tango2revC
Jan  1 00:02:33 wdtv user.notice root: INIT: Finished
Jan  1 00:02:33 wdtv user.warn kernel: mumk_register_tasklet: (0) tasklet c92a4000 status @c94c1a54
Jan  1 00:02:34 wdtv user.warn kernel: em8xxx [/home/william/WDTV/WDTV_Golden_1.00.01/core_repos/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1581] init_module: done. Found 1 em8xxx
Jan  1 00:02:34 wdtv user.warn kernel: OpenWDTV.ir opened client 0
Jan  1 00:02:34 wdtv user.warn kernel: OpenWDTV.ir calling trylock client_id 0
Jan  1 00:02:35 wdtv user.warn kernel: OpenWDTV.ir trylock aquired read lock 1 client_id 0
Jan  1 00:04:51 wdtv user.warn kernel: OpenWDTV.ir readed 4 bytes
Jan  1 00:04:51 wdtv user.warn kernel: OpenWDTV.ir readed 1 commands
Jan  1 00:04:51 wdtv user.warn kernel: OpenWDTV.ir readed command: 4127816068
Jan  1 00:04:51 wdtv user.warn kernel: OpenWDTV.ir writen 4 bytes to consumer(0) 4 out of 4
Jan  1 00:04:51 wdtv user.warn kernel: OpenWDTV.ir calling trylock client_id 0
Jan  1 00:04:51 wdtv user.warn kernel: OpenWDTV.ir trylock aquired read lock 1 client_id 0
Jan  1 00:04:52 wdtv user.warn kernel: OpenWDTV.ir readed 4 bytes
Jan  1 00:04:52 wdtv user.warn kernel: OpenWDTV.ir readed 1 commands
Jan  1 00:04:52 wdtv user.warn kernel: OpenWDTV.ir readed command: 4127816068
Jan  1 00:04:52 wdtv user.warn kernel: OpenWDTV.ir writen 4 bytes to consumer(0) 8 out of 8
Jan  1 00:04:52 wdtv user.warn kernel: OpenWDTV.ir calling trylock client_id 0
Jan  1 00:04:52 wdtv user.warn kernel: OpenWDTV.ir trylock aquired read lock 1 client_id 0
Jan  1 00:04:53 wdtv user.warn kernel: OpenWDTV.ir readed 4 bytes
Jan  1 00:04:53 wdtv user.warn kernel: OpenWDTV.ir readed 1 commands
Jan  1 00:04:53 wdtv user.warn kernel: OpenWDTV.ir readed command: 4144527748
Jan  1 00:04:53 wdtv user.warn kernel: OpenWDTV.ir writen 4 bytes to consumer(0) 12 out of 12
Jan  1 00:04:53 wdtv user.warn kernel: OpenWDTV.ir calling trylock client_id 0
Jan  1 00:04:53 wdtv user.warn kernel: OpenWDTV.ir trylock aquired read lock 1 client_id 0
Jan  1 00:04:53 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO

Появляется при этом папка Upnp, но я понимаю, что IP адрес не присваивается, и не находиться(или все-таки драйвер не подходит для адаптера),








1942. Pavel-rakun, 13.12.2009 19:06
цитата:
El'Drako:
Pavel-rakun
но почему-то не видно было самого процесса установки прошивки?
эээ, а зачем он вам? эта прошивка не прошивается - её загрузку я описывал в ветке чуть ранее (2-5 страниц).

по логам у тебя не проходит авторизация на точке доступа, поэтому конфиги вэдешки никакие не трогай, кроме пароля. И стоит тебе помучать точку доступа.

И как помучать эту точку доступа? Наверное проще другую применить?
cтандартный совет - откройте сеть полностью и попытайтесь соединиться. так будет понятна скорость и работа в общем с сетью - далее уже будет понятно. стоит ли вам мучатся с шифрованием. К тому же, для простого просмотра достаточно WEP и белого списка мас-адресов - у вас же не ключи от золотого счёта там лежат.
А можно ли сделать так: убрать точку доступа из этой связки. Создать на ноутбуке с WiFi открытое соединение "компьютер-компьютер" и пробовать через него с плеером (с подключенной DWA-110) соедениться?
Только наверное IP адрес надо вручную в net.config прописывать?
У меня ADSL роутер с IP: 192.168.1.1 и соответственно ноутбук с WiFi подключенный к нему через LAN имеет IP: 192.168.1.2, следующий комп: ....1.3 и т.д.

1944. Pavel-rakun, 13.12.2009 21:58
El'Drako
Спасибо-буду пробовать

1954. Pavel-rakun, 16.12.2009 11:14
Подскажите, если использовать Wi-Fi USB адаптер на чипсете ZyDas, то никаких дополнительных файлов типа *.dat ( как в случае с Ratlink - rt73sta.dat ) не требуется?

2015. Pavel-rakun, 24.12.2009 11:49
Настроил (пока без шифрования)подключение по WiFi с такой конфигурацией:
ноутбук с WiFi
точка доступа-D-Link DWL-2100
WiFi USB адптер ORIENT XG-701 (чип ZD1211b) ( с DWA-110 так пока ничего не получилось)
прошивка Ext3-boot 1.03.01_ext3-boot_0.9.2_lilibabe6x2_big_ru_eldrako + wireless-mod.app.bin

net.config
код:
HOST=dlink
DHCP=no
IP=192.168.1.10 #  ип вэдешки
GW=192.168.1.8 #  комп
NM=255.255.255.0 
DNS1=192.168.1.8 #  комп

net.mounts
код:
 xmount //192.168.1.8/Hdtv Hdtv cifs

на компьютере расшарена папка с именем Hdtv
К медиаплееру подключен HDD, который разбит на два раздела 1-FAT32(4 гига), 2-й NTFS (75 гиг).
Прошивка и бины на первом разделе.
Когда включил первый раз-расшаренная папка была видна на медиаплеере, но при последующих
включениях и перезагрузках напрочь ничего не видно.
Не понимаю, почему так происходит?
И еще такой вопрос - когда захожу из командной строки на WDTV (командой \\192.168.1.10),
то вижу талько первый раздел винчестера, на который могу залить информацию по сети. Но при отключении винчестера от проигрывателя
эта информация почему-то пропадает).
Второй раздел, который в NTFS вроде виден ( USB1-внутри папки с непонятными цифробуквенными именами), но на него ничего записать не могу-нет доступа.
Если зайти по FTP в "тотал командире", то вижу только область со служебными папками.

пробовал ставить webserver.app. В броузере заходит, но расшарить папки не удается-пишет неправильной имя или пароль Windows (комп загружается с правами администратора с именем "Pavel" без пароля.

нужна помощь в решении вопросов!

messages.txt весь не влазит
код:
Jan  1 00:00:27 dlink user.notice root: Polling detected drives...
Jan  1 00:00:28 dlink user.notice root: xmount.scan: MDEV=sda2
Jan  1 00:00:28 dlink user.notice root: /dev/sda2: UUID="E46D7E86607C2D00" LABEL="WDTV-FILM" TYPE="ntfs" 
Jan  1 00:00:28 dlink user.notice root: xmount.scan: Will not mount /dev/sda2 (ntfs)
Jan  1 00:00:28 dlink user.notice root: Waiting for /dev/sda1 to come online (UUID=44DE-6791)...
Jan  1 00:00:30 dlink authpriv.info dropbear[806]: Running in background
Jan  1 00:00:36 dlink user.info kernel: SMP86xx ir (252:0): driver loaded (wait_period = 100ms, buffer_size = 6)
Jan  1 00:00:36 dlink user.warn kernel: SMP86xx fip (251:0): driver loaded (buffer_size = 2)
Jan  1 00:00:37 dlink user.warn kernel: cdrom: No versions for exported symbols. Tainting kernel.
Jan  1 00:00:37 dlink user.warn kernel: mii: No versions for exported symbols. Tainting kernel.
Jan  1 00:00:37 dlink user.warn kernel: usbnet: No versions for exported symbols. Tainting kernel.
Jan  1 00:00:37 dlink user.info kernel: usbcore: registered new driver asix
Jan  1 00:00:37 dlink user.info kernel: /home/Zehd/wdtv/dm9601/dm9601.c: /home/Zehd/wdtv/dm9601/dm9601.c: v0.0.6 2001/05/24 (C) 1999-2000 Petko Manolov (petkan@dce.bg)
Jan  1 00:00:38 dlink user.info kernel: usbcore: registered new driver dm9601
Jan  1 00:00:38 dlink user.info kernel: usbcore: registered new driver kaweth
Jan  1 00:00:38 dlink user.info kernel: usbcore: registered new driver MOSCHIP usb-ethernet driver
Jan  1 00:00:38 dlink user.info kernel: pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
Jan  1 00:00:38 dlink user.info kernel: usbcore: registered new driver pegasus
Jan  1 00:00:38 dlink user.info kernel: usbcore: registered new driver catc
Jan  1 00:00:38 dlink user.info kernel: drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
Jan  1 00:00:38 dlink user.info kernel: drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
Jan  1 00:00:38 dlink user.info kernel: usbcore: registered new driver rtl8150
Jan  1 00:00:39 dlink user.warn kernel: cdc_ether: No versions for exported symbols. Tainting kernel.
Jan  1 00:00:39 dlink user.info kernel: usbcore: registered new driver cdc_ether
Jan  1 00:00:39 dlink user.info kernel: usbcore: registered new driver cdc_subset
Jan  1 00:00:39 dlink user.info kernel: usbcore: registered new driver net1080
Jan  1 00:00:39 dlink user.info kernel: usbcore: registered new driver plusb
Jan  1 00:00:39 dlink user.info kernel: usbcore: registered new driver rndis_host
Jan  1 00:00:40 dlink user.info kernel: usbcore: registered new driver gl620a
Jan  1 00:00:40 dlink user.warn kernel: wireless_ext: No versions for exported symbols. Tainting kernel.
Jan  1 00:00:40 dlink user.info kernel: Loading wireless extentions module...
Jan  1 00:00:41 dlink user.warn kernel: firmware_class: No versions for exported symbols. Tainting kernel.
Jan  1 00:00:41 dlink user.info kernel: usbcore: registered new driver zd1201
Jan  1 00:00:41 dlink user.notice kernel: ZD1211B - version 2.19.2.9
Jan  1 00:00:42 dlink user.notice kernel: vendor_id = 0ace
Jan  1 00:00:42 dlink user.notice kernel: product_id = 1215
Jan  1 00:00:42 dlink user.notice kernel: USB 2.0 Host
Jan  1 00:00:42 dlink user.notice kernel: Release Ver = 4810
Jan  1 00:00:42 dlink user.notice kernel: EEPROM Ver = 4810
Jan  1 00:00:42 dlink user.warn kernel: Finish download Firmware. Ready to reboot 
Jan  1 00:00:42 dlink user.err kernel: PA type: 0
Jan  1 00:00:42 dlink user.warn kernel: PHYNEWLayout = 1
Jan  1 00:00:42 dlink user.warn kernel: Airoha AL2230S_RF
Jan  1 00:00:42 dlink user.warn kernel: ieee80211_dirmcast_attach
Jan  1 00:00:42 dlink user.debug kernel: OverWrite CR47 = 0x1C
Jan  1 00:00:42 dlink user.debug kernel: zd1205_config: EEP(HWFeature)=0x580
Jan  1 00:00:42 dlink user.warn kernel: AllowedChannel = 000107ff
Jan  1 00:00:42 dlink user.warn kernel: Region:48
Jan  1 00:00:42 dlink user.info kernel: usbcore: registered new driver zd1211b
Jan  1 00:00:42 dlink user.notice root: net.agent: Called for eth0
Jan  1 00:00:42 dlink user.notice root: net.agent: Using /boot/net.config: DHCP=no IP=192.168.1.10 GW=192.168.1.8
Jan  1 00:00:43 dlink user.notice root: Testing static IP assignment...
Jan  1 00:00:43 dlink user.notice kernel: arusb - version 0.0.0.999
Jan  1 00:00:43 dlink user.info kernel: usbcore: registered new driver Otus
Jan  1 00:00:44 dlink user.warn kernel: rtusb init --->
Jan  1 00:00:44 dlink user.info kernel: usbcore: registered new driver rt2870
Jan  1 00:00:44 dlink user.info kernel: usbcore: registered new driver rt73
Jan  1 00:00:54 dlink daemon.notice statd[1617]: Version 1.1.5 Starting
Jan  1 00:00:54 dlink daemon.notice statd[1617]: statd running as root. chown /tmp/nfs/sm to choose different user
Jan  1 00:00:57 dlink user.debug kernel: ir: Enable NEC decoder (0x00000000)
Jan  1 00:00:58 dlink user.debug kernel: ir: Enable RC5 decoder (0x00000000)
Jan  1 00:00:58 dlink user.notice root: Ping: 6 packets transmitted, 5 packets received, 16% packet loss
Jan  1 00:00:58 dlink user.notice root: net.agent: Using pool.ntp.org to set system time
Jan  1 00:00:58 dlink user.notice root: Device eth0 configged as 192.168.1.10/192.168.1.8/255.255.255.0
Jan  1 00:00:59 dlink user.notice root: net.mounts: loading /boot/net.mounts
Jan  1 00:01:00 dlink user.notice root: xmount: //192.168.1.8/Hdtv Hdtv cifs
Jan  1 00:01:00 dlink user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan  1 00:01:06 dlink user.info kernel: NTFS volume version 3.1.
Jan  1 00:01:08 dlink user.notice root: xmounter: entering stage2
Jan  1 00:01:12 dlink user.notice root: xmount: //192.168.1.8/Hdtv Hdtv cifs user=guest
Jan  1 00:01:12 dlink user.notice root: xmount: /tmp/boot exists, now mounting...
Jan  1 00:01:13 dlink user.err kernel:  CIFS VFS: No response for cmd 114 mid 1
Jan  1 00:01:13 dlink user.notice root: Now mounted:
Jan  1 00:01:13 dlink user.notice root: rootfs on / type rootfs (rw)
Jan  1 00:01:13 dlink user.notice root: proc on /proc type proc (rw,nodiratime)
Jan  1 00:01:13 dlink user.notice root: sysfs on /sys type sysfs (rw)
Jan  1 00:01:13 dlink user.notice root: mdev on /dev type tmpfs (rw)
Jan  1 00:01:13 dlink user.notice root: devpts on /dev/pts type devpts (rw)
Jan  1 00:01:13 dlink user.notice root: /dev/sda1 on /boot type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan  1 00:01:13 dlink user.notice root: /dev/loop1 on / type ext3 (rw,noatime,nodiratime,data=ordered)
Jan  1 00:01:13 dlink user.notice root: none on /proc type proc (rw,nodiratime)
Jan  1 00:01:13 dlink user.notice root: usb on /proc/bus/usb type usbfs (rw)
Jan  1 00:01:13 dlink user.notice root: sysfs on /sys type sysfs (rw)
Jan  1 00:01:13 dlink user.notice root: mdev on /dev type tmpfs (rw)
Jan  1 00:01:13 dlink user.notice root: devpts on /dev/pts type devpts (rw)
Jan  1 00:01:13 dlink user.notice root: none on /tmp type tmpfs (rw)
Jan  1 00:01:13 dlink user.notice root: none on /apps type tmpfs (rw)
Jan  1 00:01:13 dlink user.notice root: /dev/loop0 on /apps/log-saver type cramfs (ro)
Jan  1 00:01:13 dlink user.notice root: /dev/loop2 on /apps/wireless-mod type cramfs (ro)
Jan  1 00:01:13 dlink user.notice root: /dev/sda1 on /tmp/media/usb/USB1/44DE-6791 type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan  1 00:01:13 dlink user.notice root: /dev/sda2 on /tmp/media/usb/USB1/E46D7E86607C2D00 type ntfs (ro,noatime,nodiratime,uid=0,gid=0,fmask=0177,dmask=077,nls=utf8,errors=continue,mft_zone_multiplier=1)
Jan  1 00:01:14 dlink user.notice root: none on /tmp/media/usb/Hdtv type tmpfs (rw)
Jan  1 00:01:14 dlink user.notice root: none on /tmp/media/usb/USB1/44DE-6791/Hdtv type tmpfs (rw)
Jan  1 00:02:06 dlink ftp.info pure-ftpd: (?@?) [INFO] New connection from ?
Jan  1 00:02:07 dlink ftp.info pure-ftpd: (?@?) [INFO] root is now logged in
Jan  1 00:02:27 dlink user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan  1 00:02:29 dlink user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan  1 00:02:38 dlink user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan  1 00:02:42 dlink user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan  1 00:02:42 dlink user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan  1 00:02:42 dlink user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan  1 00:02:57 dlink user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan  1 00:07:11 dlink daemon.info utelnetd: connection from: 192.168.1.8
Jan  1 00:07:17 dlink auth.info login[3588]: root login on 'pts/0'
Jan  1 00:08:44 dlink ftp.info pure-ftpd: (?@?) [INFO] New connection from ?
Jan  1 00:08:44 dlink ftp.err pure-ftpd: (?@?) [ERROR] Unable to set up secure anonymous FTP

2020. Pavel-rakun, 24.12.2009 13:10
El'Drako
Спасибо
RooRoo
Да, я уже понял что скорость на NTFS никакая(тем более по WIFI). Видимо лучше LAn делать.
Спасибо за советы

2023. Pavel-rakun, 25.12.2009 11:41
цитата:
RooRoo:
Pavel-rakun
Попробуйте в net.mount строку следующего вида:
xmount //192.168.1.8/Hdtv Hdtv cifs user=Pavel,pass=,iocharset=utf8
или
xmount //192.168.1.8/Hdtv Hdtv cifs user=Pavel,pass='',iocharset=utf8
'' - это не двойные кавычки, а две одинарные

Через FTP второй раздел (NTFS) у вас доступен по адресу /tmp/media/usb/USB1/E46D7E86607C2D00
Первый здесь: /tmp/media/usb/USB1/44DE-6791

Писать на NTFS-раздел не получится (полноценно). У WDTV не хватит на это производительности, да и подмонтирован он в режиме Read Only. Попробовать можно, но у меня не получилось - страшно тормозило. Отказался от этой затеи. Точка монтирования в режиме RW - /tmp/media/usb/USB1/.E46D7E86607C2D00 скорее всего (точка перед ID диска добавляется).

Спасибо всем за терпение и понимание


Если я правильно понял, то для того, чтобы записывать файлы на HDD подключенный к WDTV по WiFi с более-менее приличной скоростью,
необходимо:
1. Отформатировать второй раздел винчестера в Ext3 (к примеру программой Acronic )
2. Установить прошивку, например 1.03.01_ext3-boot_0.9.2_lilibabe6x2_big_ru_eldrako,
(надо ли еще дополнительные модули?)
3. Установить на комп NFS Server 1.1.66
4. Скорректировать файл net.mounts, к примеру так
код:
xmount 192.168.1.10:/d/Hdtv Hdtv nfs

И по сети можно будет скидывать файлы в папку tmp/media/usb/ ?

Надо ли устанавливать Ext2Fsd - не совсем понимаю её назначение.

Кстати у меня почему-то при добавлении
код:
iocharset=utf8
в net.mounts категорично
перестают видиться расшаренные файлы, без этой фразы все прекрасно видиться (только без поддержки русских имен) даже без ввода имени и пароля в строке xmount...

2668. Pavel-rakun, 18.08.2010 22:59
[q]El'Drako:
Pavel-rakun
но почему-то не видно было самого процесса установки прошивки?
эээ, а зачем он вам? эта прошивка не прошивается - её загрузку я описывал в ветке чуть ранее (2-5 страниц).

по логам у тебя не проходит авторизация на точке доступа, поэтому конфиги вэдешки никакие не трогай, кроме пароля. И стоит тебе помучать точку доступа.

И как помучать эту точку доступа? Наверное проще другую применить?


URL: http://forum.ixbt.com/topic.cgi?id=62:15686