Приветствую всех!
Хочу перепрошить по ком-порту(СN4) WD TV Live(я спецом сюда пишу),ибо "помёр" он от фирменной прошивки.Кажет на ТВ экран с двумя кругами и пишет -дай флеху с фирмварью и не берёт её (версии "прописывал"-подсовывал все что можно найти есть).Вот скан PuTTY по компорту(другими способами никак)....хотца домучить железку - всё одно кирдык.Да и дебиан хотел в неё ... тока не реагирует она ни на что....ядро бы в неё перезалить по UART..,но..флешеров для сигм не нашёл...и..в бузибокс войти нечем!?!
Залогинится не даёт ни в какую.Реакции-ноль!Чё только не шил-а тут тупик
Мож туплю чё!?!Подскажите... 
Хочу перепрошить по ком-порту(СN4) WD TV Live(я спецом сюда пишу),ибо "помёр" он от фирменной прошивки.Кажет на ТВ экран с двумя кругами и пишет -дай флеху с фирмварью и не берёт её (версии "прописывал"-подсовывал все что можно найти есть).Вот скан PuTTY по компорту(другими способами никак)....хотца домучить железку - всё одно кирдык.Да и дебиан хотел в неё ... тока не реагирует она ни на что....ядро бы в неё перезалить по UART..,но..флешеров для сигм не нашёл...и..в бузибокс войти нечем!?!
001 | 39idxfsef2f712148b75194ab1d3c691b55bd4d3a5e956dS |
002 | |
003 | #xos2P4a-99 (sfla 128kbytes. subid 0xac/ac) [serial#77152b3e15fa5bea5535f99c90aa6a92] |
004 | #stepxmb 0xac |
005 | #DRAM setup (method=0x10015858) ... |
006 | #DRAM0 Window : 0x#26#28#24#26# (18) |
007 | #DRAM1 Window : 0x#28#2a#28#2a# (20) |
008 | #DRAM0 Settings: WD=0x0b0b0b0b RG=0x09090809 RR=0x09090809 RF=0x0a0a090b |
009 | #DRAM1 Settings: WD=0x0b0b0b0b RG=0x090a090a RR=0x090a090a RF=0x0a0b0a0b |
010 | #poisoned 131072 pages with 0x7ceeb26e |
011 | #step6 @0*** zxenv has been customized compared to build *** |
012 | --- review xmasboot/configs/922-A2.config for details [xmbad-ezboot82-nand_st2] --- |
013 | xloadsize=39380 |
014 | xload rc=6 |
015 | subrom SHA-256: 43b5383fcd2ecd1f5366bea4eafc03bd740dc0a113af58d02846c117fb581b5b |
016 | ezboot82 @0xd0105bb0 (nand_st2) (actual cpu=@499MHz/dsp=333MHz/sys=333MHz) |
017 | on 8655 rev ES5 (subid 0xac) a2=0x00000002 a3=0x00000003 |
018 | step12 |
019 | #step22 |
020 | ruamm0 [0x80000000,0x8f634000[ (~258162688 bytes) |
021 | ruamm1 [0xcca00000,0xcfd60000[ (~53870592 bytes) |
022 | [0xcfd20000,xos_public_ga=0xcfd20000[ and [0xcfd40000,0xcfd5ffff[ are lost for alignment) |
023 | channel#ei |
024 | x_ga=0xcfd1fcd4 |
025 | [0x8e634000,ios_ga=0x8e800000[ and [0x8eeacfc1,0x8f633fff[ are lost for alignment) |
026 | GW32 0x0006f008 0xc0000000 [va=0x84000000] |
027 | GW32 0x0006f00c 0xc4000000 [va=0x88000000] |
028 | GW32 0x0006f010 0xc8000000 [va=0x8c000000] |
029 | step33 |
030 | xos2k client version=19, server version=19 |
031 | xos2 SHA-1 = ef2f712148b75194ab1d3c691b55bd4d3a5e956d (version 0x4a) |
032 | xos2 serial = 77152b3e15fa5bea5535f99c90aa6a92 |
033 | Using zbootxenv ga=0xcfd0bcbc (va=0xbbd0bcbc) |
034 | |
035 | ************************************** |
036 | * SMP86xx zboot start ... |
037 | * Version: 3.1.0 |
038 | * Started at 0xd010ddb4. |
039 | * Configurations (chip revision: 1): |
040 | * Enabled checkpoints. |
041 | ************************************** |
042 | DRAM0 dunit_cfg/delay0_ctrl (0x3514001a/0x4565132b). |
043 | DRAM1 dunit_cfg/delay0_ctrl (0x3514001a/0x4565132b). |
044 | Using UART port 0 as console. |
045 | Board ID.: villa_d2 |
046 | Setting up H/W from XENV block at 0xbbd0bcbc. |
047 | Setting <SYSCLK avclk_mux> to 0x17400000. |
048 | Setting <SYSCLK hostclk_mux> to 0x00000110. |
049 | Setting <IRQ rise edge trigger lo> to 0xff28ca00. |
050 | Setting <IRQ fall edge trigger lo> to 0x0000c000. |
051 | Setting <IRQ rise edge trigger hi> to 0x0c10009f. |
052 | Setting <IRQ fall edge trigger hi> to 0x00000000. |
053 | Setting <IRQ GPIO map> to 0x000a0800. |
054 | Setting <PB default timing> to 0x03080202. |
055 | Keeping <PB timing0> to 0x03080202. |
056 | Keeping <PB Use timing0> to 0x000003f3. |
057 | Keeping <PB CS Config> to 0x00330003. |
058 | Enabled Devices: 0x001b3efc |
059 | PCIHost Ethernet Ethernet1 IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SATA SCARD SCARD1 |
060 | PCI IRQ routing: |
061 | IDSEL 1: INTA(#14) INTB(#14) INTC(#14) INTD(#14) |
062 | IDSEL 2: INTA(#14) INTB(#14) INTC(#14) INTD(#14) |
063 | IDSEL 3: INTA(#14) INTB(#14) INTC(#14) INTD(#14) |
064 | IDSEL 4: INTA(#14) INTB(#14) INTC(#14) INTD(#14) |
065 | Smartcard pin assignments: |
066 | OFF pin = 2 |
067 | 5V pin = 0 |
068 | CMD pin = 1 |
069 | Smartcard1 pin assignments: |
070 | OFF pin = 2 |
071 | 5V pin = 0 |
072 | CMD pin = 1 |
073 | cd#0 disabled |
074 | cd#1 disabled |
075 | cd#2 want 96000000Hz: setting of 0x0000000021c00000-2^28 |
076 | cd#2 cannot measure |
077 | cd#3 disabled |
078 | cd#4 want 33333333Hz: setting of 0x0000000061333343-2^28 |
079 | cd#4 measured to 33328kHz |
080 | cd#5 disabled |
081 | cd#6 disabled |
082 | cd#7 disabled |
083 | cd#8 disabled |
084 | cd#9 disabled |
085 | cd#10 disabled |
086 | cd#11 disabled |
087 | GPIO dir/data = 0x00000880/0x00000880 |
088 | UART0 GPIO mode/dir/data = 0x6e/0x00/0x00 |
089 | UART1 GPIO mode/dir/data = 0x6e/0x04/0x04 |
090 | Generate pulse(s) with GPIO7 .. 1,0(10000us),1 |
091 | MAC0: 00:90:a9:72:2e:e8 |
092 | MAC1: 00:16:e8:35:f9:9c |
093 | XENV block processing completed. |
094 | Default boot index: 1, sel:1 |
095 | xmboot booted from devtype: 0, chipsel: 0 |
096 | Explicit boot order specified: |
097 | 0x00 : devtype=0, CS=0 |
098 | 0x01 : devtype=0, CS=1 |
099 | 0x20 : devtype=2, CS=0 |
100 | 0x21 : devtype=2, CS=1 |
101 | xmat romfs goes to 0xcfc0bca0 (ga) |
102 | xmat romfs goes to 0xb3c0bca0 (va) |
103 | Trying devtype=0 chipsel=0 |
104 | gbus_read_unit32 0x0xd0103448 0x0xd0103448 |
105 | nand_handle 0xd011c4f8 st_partition 0 |
106 | nand_handle.p_partition 0xd011c0a8....... |
107 | nand_probe 0x0xd01131a4 |
108 | nand_Mg_open 0 |
109 | Reading NAND CS0, addr 0x016c0000, maxsize 0x00100000 to 0xb3c0bca0 |
110 | Reading NAND CS0, addr 0x016c0000, size 0x00022000 to 0xb3c0bca0 |
111 | File xtask_loader.xload found |
112 | Trying devtype=0 chipsel=0 |
113 | Reading NAND CS0, addr 0x078bf800, maxsize 0x00000800 to 0xd013f540 |
114 | sign_addr=0x078bfffc *sign=0, *sign=0, *sign=0, *sign=0 |
115 | firmware error. |
116 | found imat romfs @ 0x008c0000 |
117 | imap romfs goes to 0xcec0bc90 (ga) |
118 | imap romfs goes to 0xb2c0bc90 (va) |
119 | Trying devtype=0 chipsel=0 |
120 | Reading NAND CS0, addr 0x008c0000, maxsize 0x01000000 to 0xb2c0bc90 |
121 | Reading NAND CS0, addr 0x008c0000, size 0x00151000 to 0xb2c0bc90 |
122 | File itask_loader.iload found |
123 | Channel pending 1296 |
124 | Channel pending 956164 |
125 | Channel pending 2003298 |
126 | Channel pending 3094052 |
127 | Channel pending 4184792 |
128 | Channel pending 5275558 |
129 | Channel pending 6366302 |
130 | Channel pending 7457068 |
131 | Channel pending 8547808 |
132 | Channel pending 9638586 |
133 | Trying devtype=0 chipsel=0 |
134 | reading z.boot1 (vzx=0xbbd0bcbc) is 0x000c0000 |
135 | Reading NAND CS0, addr 0x000c0000, maxsize 0x01000000 to 0x88100000 |
136 | Reading NAND CS0, addr 0x000c0000, size 0x002b4000 to 0x88100000 |
137 | Found. |
138 | ROMFS found at 0x0x88100000, Volume name = MIPSLINUX_XLOAD |
139 | Found 1 file(s) to be processed in ROMFS. |
140 | Processing vmlinux_xload.zbf (start: 0x88100090, size: 0x002b3e04) |
141 | Checking zboot file signature .. OK. |
142 | Warning: header version mismatched. |
143 | *** Fully Encrypted. |
144 | src addr = 0xb1800000, dest addr = 0x13000000, is_dest_gaddr = 0x00000010 |
145 | XLOADING src=0x81800000, dest=0x13000000, size=0x002b3de4 |
146 | xload.c:63: Waiting for XLOAD completion. |
147 | xload.c:73: XLOAD done, status = 0x6. |
148 | Decompressing to 0x84000000 .. OK (5460778/0x53532a). |
149 | Load time total 0/0 msec. |
150 | Execute final at 0x84460000 .. |
151 | Linux version 2.6.22.19-19-4 (andy@SVN-server) (gcc version 4.3.2 (Sourcery G++ Lite 4.3-51) ) #5 PREEMPT Fri Nov 6 19:44:59 CST 2009 |
152 | Physical map 0xc0000000 to 0x04000000, max remap/kernel size: 0x0c000000/0x18000000. |
153 | Configured for SMP865x, detected SMP8655 (revision unknown). |
154 | Detected CPU/System/DSP Frequencies: 499.50/333.00/333.00MHz |
155 | SMP86xx Enabled Devices under Linux/XENV 0xcfd0bcbc = 0x001b3efc |
156 | PCIHost Ethernet Ethernet1 IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SATA SCARD SCARD1 |
157 | CPU revision is: 0001937c |
158 | FPU revision is: 01739300 |
159 | Determined physical RAM map: |
160 | memory: 05000000 @ 04000000 (usable) |
161 | Modified physical map 0xc0000000 to 0x04000000, max remap/kernel size: 0x10000000/0x18000000. |
162 | User-defined physical RAM map: |
163 | memory: 0c800000 @ 04000000 (usable) |
164 | Wasting 131072 bytes for tracking 4096 unused pages |
165 | Initrd not found or empty - disabling initrd |
166 | On node 0 totalpages: 16896 |
167 | DMA zone: 33 pages used for memmap |
168 | DMA zone: 0 pages reserved |
169 | DMA zone: 16863 pages, LIFO batch:3 |
170 | Normal zone: 0 pages used for memmap |
171 | Built 1 zonelists. Total pages: 16863 |
172 | Kernel command line: console=ttyS0 mem=200M |
173 | Primary instruction cache 32kB, 4-way, physically tagged, linesize 32 bytes. |
174 | Primary data cache 32kB, 4-way, physically tagged, no aliases, linesize 32 bytes |
175 | Synthesized TLB refill handler (20 instructions). |
176 | Synthesized TLB load handler fastpath (32 instructions). |
177 | Synthesized TLB store handler fastpath (32 instructions). |
178 | Synthesized TLB modify handler fastpath (31 instructions). |
179 | Cache parity protection disabled |
180 | PID hash table entries: 2048 (order: 11, 8192 bytes) |
181 | Using 249.750 MHz high precision timer. |
182 | Console: colour dummy device 80x25 |
183 | Dentry cache hash table entries: 65536 (order: 4, 262144 bytes) |
184 | Inode-cache hash table entries: 32768 (order: 3, 131072 bytes) |
185 | Memory: 197776k/204800k available (3653k kernel code, 6800k reserved, 810k data, 864k init, 0k highmem) |
186 | Calibrating delay loop... 332.59 BogoMIPS (lpj=1662976) |
187 | Mount-cache hash table entries: 2048 |
188 | NET: Registered protocol family 16 |
189 | PCI: Initializing SMP86xx PCI host controller |
190 | PCI: Remapped PCI I/O space 0x58000000 to 0xc0000000, size 64 kB |
191 | PCI: Remapped PCI config space 0x50000000 to 0xc0018000, size 10 kB |
192 | PCI: Configured SMP86xx as PCI slave with 1024MB PCI memory |
193 | PCI: Region size is 131072KB |
194 | PCI: Map DMA memory 0x04000000-0x10800000 for PCI at 0x48000000 |
195 | SCSI subsystem initialized |
196 | libata version 2.21 loaded. |
197 | usbcore: registered new interface driver usbfs |
198 | usbcore: registered new interface driver hub |
199 | usbcore: registered new device driver usb |
200 | Time: TANGOX clocksource has been installed. |
201 | NET: Registered protocol family 2 |
202 | IP route cache hash table entries: 4096 (order: 0, 16384 bytes) |
203 | TCP established hash table entries: 16384 (order: 3, 131072 bytes) |
204 | TCP bind hash table entries: 16384 (order: 2, 65536 bytes) |
205 | TCP: Hash tables configured (established 16384 bind 16384) |
206 | TCP reno registered |
207 | NTFS driver 2.1.28 [Flags: R/O]. |
208 | fuse init (API version 7.8) |
209 | io scheduler noop registered |
210 | io scheduler anticipatory registered |
211 | io scheduler deadline registered |
212 | io scheduler cfq registered ( default ) |
213 | tango3dog: Hardware Watchdog Timer for SMP864x/SMP865x 0.1 (def. timeout: 30 sec) |
214 | Serial: 8250/16550 driver $Revision : 1.90 $ 2 ports, IRQ sharing disabled |
215 | serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A |
216 | serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A |
217 | loop: module loaded |
218 | tangox_enet0: detected phy at address 0x01 |
219 | tangox_enet0: Ethernet driver for SMP864x/SMP865x internal MAC core 0: 100Mbps Base at 0x26000 |
220 | tangox_enet0: mac address 00:90:a9:72:2e:e8 |
221 | tangox_enet1: unable to autodetect phy |
222 | Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 |
223 | ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx |
224 | tangox_bmide: bmide support is disabled |
225 | k_name=Tangox SATA 0 driver=Tangox SATA 0 |
226 | SATA version 0x3139302a ID 0x0 is detected |
227 | scsi0 : Tangox SATA 0 |
228 | ata1: SATA max UDMA/133 cmd 0xa0023000 ctl 0xa0023020 bmdma 0xcdcdcdcd irq 49 |
229 | ata1: SATA link down (SStatus 0 SControl 300) |
230 | k_name=Tangox SATA 1 driver=Tangox SATA 1 |
231 | SATA version 0x3139302a ID 0x0 is detected |
232 | scsi1 : Tangox SATA 0 |
233 | ata2: SATA max UDMA/133 cmd 0xa0023800 ctl 0xa0023820 bmdma 0xcdcdcdcd irq 62 |
234 | ata2: SATA link down (SStatus 0 SControl 300) |
235 | ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver |
236 | USB Universal Host Controller Interface driver v3.0 |
237 | driver tangox-ehci-hcd, 10 Dec 2004 |
238 | TangoX USB initializing... |
239 | tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0 |
240 | tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1 |
241 | tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021400 |
242 | tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 |
243 | usb usb1: configuration #1 chosen from 1 choice |
244 | hub 1-0:1.0: USB hub found |
245 | hub 1-0:1.0: 2 ports detected |
246 | tangox-ohci-hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver |
247 | TangoX USB was initialized. |
248 | Initializing TangoX USB OHCI Controller Membase=0xa0021500, irq=47 |
249 | tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller |
250 | tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2 |
251 | tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500 |
252 | usb usb2: configuration #1 chosen from 1 choice |
253 | hub 2-0:1.0: USB hub found |
254 | hub 2-0:1.0: 2 ports detected |
255 | Initializing USB Mass Storage driver... |
256 | usb 1-1: new high speed USB device using tangox-ehci-hcd and address 2 |
257 | usb 1-1: configuration #1 chosen from 1 choice |
258 | scsi2 : SCSI emulation for USB Mass Storage devices |
259 | usbcore: registered new interface driver usb-storage |
260 | usb-storage: device found at 2 |
261 | usb-storage: waiting for device to settle before scanning |
262 | USB Mass Storage support registered. |
263 | mice: PS/2 mouse device common for all mice |
264 | TCP cubic registered |
265 | NET: Registered protocol family 1 |
266 | NET: Registered protocol family 17 |
267 | ieee80211: 802.11 data/management/control stack, git-1.1.13 |
268 | ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> |
269 | ieee80211_crypt: registered algorithm 'NULL' |
270 | Freeing unused kernel memory: 864k freed |
271 | ==================PRIMARY SYSTEM============================ |
272 | export SYSCONF_BUILD_DATE=2009.11.06-1942 |
273 | export SYSCONF_FIRMWARE_BIN=wdtvlive.bin |
274 | export SYSCONF_FIRMWARE_VER=wdtvlive.ver |
275 | export SYSCONF_BOOTLOADER_MTD_PARTITION=/dev/sigmblsigmablock: module license 'Proprietary' taints kernel. |
276 | ocka |
277 | export SYSCONF_KERNEL_MTD_PARTITION=/dev/s |
278 | CS 0 vendor id 0x2c....... |
279 | igmblockd |
280 | exporCS 0 device id 0xda....... |
281 | t SYSCONF_FIRMWARE_MTD_PARTITION.=/dev/sigmblockh. |
282 | export SYSCONF._FIRMWARE_MTD_SI.ZE=94371840 |
283 | exp .ort SYSCONF_FIRM.WARE_STORAGE_PAR.TITION=/dev/sigm.blocki |
284 | export S.YSCONF_STORAGE_P.ARTITION_SIZE=94.371840 |
285 | export S.YSCONF_DOUBLE_SP.LASH_SCREEN=y |
286 | =.================.================.================.=========== |
287 | |
288 | P.rimary built dat.e: 2009.11.06-19.42 |
289 | |
290 | ............................................................................................................................................................................................................................................ |
291 | |
292 | ********************** Parition configureations for CS 0 ******************* |
293 | **** parition 1 offset [0x00000000] + size [0x00080000] = [0x00080000] **** |
294 | **** parition 2 offset [0x00080000] + size [0x00040000] = [0x000c0000] **** |
295 | **** parition 3 offset [0x000c0000] + size [0x00300000] = [0x003c0000] **** |
296 | **** parition 4 offset [0x003c0000] + size [0x00300000] = [0x006c0000] **** |
297 | **** parition 5 offset [0x006c0000] + size [0x01000000] = [0x016c0000] **** |
298 | **** parition 6 offset [0x016c0000] + size [0x00800000] = [0x01ec0000] **** |
299 | **** parition 7 offset [0x01ec0000] + size [0x05a00000] = [0x078c0000] **** |
300 | **** parition 8 offset [0x078c0000] + size [0x05a00000] = [0x0d2c0000] **** |
301 | **** parition 9 offset [0x0d2c0000] + size [0x00020000] = [0x0d2e0000] **** |
302 | **** parition 10 offset [0x0d2e0000] + size [0x00020000] = [0x0d300000] **** |
303 | **** parition 11 offset [0x0d300000] + size [0x00020000] = [0x0d320000] **** |
304 | chip_index 0 pos 0 |
305 | |
306 | CS 1 vendor id 0x00....... |
307 | CS 1 device id 0x00....... |
308 | nand_probe Error on chip 1 ret code -13 |
309 | 4+0 records in |
310 | 4+0 records out |
311 | SYSCONF_FIRMWARE_MTD_PARTITION = /dev/sigmblockh |
312 | FW_SIGN = |
313 | 4+0 records in |
314 | 4+0 records out |
315 | STORAGE_SIGN = fpkg |
316 | =============================================================================== |
317 | ================ Upgrade from storage partition : /dev/sigmblocki =================== |
318 | =============================================================================== |
319 | Mounting storage partition ... |
320 | Getting upgrade firmware ... |
321 | scsi 2:0:0:0: Direct-Access Generic 6000 PQ: 0 ANSI: 0 CCS |
322 | sd 2:0:0:0: [sda] 3994624 512-byte hardware sectors (2045 MB) |
323 | sd 2:0:0:0: [sda] Write Protect is off |
324 | sd 2:0:0:0: [sda] Mode Sense: 4b 00 00 08 |
325 | sd 2:0:0:0: [sda] Assuming drive cache: write through |
326 | sd 2:0:0:0: [sda] 3994624 512-byte hardware sectors (2045 MB) |
327 | sd 2:0:0:0: [sda] Write Protect is off |
328 | sd 2:0:0:0: [sda] Mode Sense: 4b 00 00 08 |
329 | sd 2:0:0:0: [sda] Assuming drive cache: write through |
330 | sda: sda1 |
331 | sd 2:0:0:0: [sda] Attached SCSI removable disk |
332 | sd 2:0:0:0: Attached scsi generic sg0 type 0 |
333 | usb-storage: device scan complete |
334 | 823808+1 records in |
335 | 823808+1 records out |
336 | Mounting upgrade firmware ... |
337 | mknod: /dev/loop0: File exists |
338 | mknod: /dev/loop1: File exists |
339 | Upgrade firmware mounted.. |
340 | Checking md5sum for all files in upgrade firmware.. |
341 | cramfs: bad compressed blocksize 4275575275 |
342 | cramfs: bad compressed blocksize 4275567887 |
343 | cramfs: bad compressed blocksize 4275584699 |
344 | cramfs: bad compressed blocksize 4275574743 |
345 | cramfs: bad compressed blocksize 4275574211 |
346 | Error -3 while decompressing! |
347 | 845764e4(14756)->8c17c000(16384) |
348 | cramfs: bad compressed blocksize 4275583567 |
349 | md5sum: WARNING: 8 of 1448 computed checksums did NOT match |
350 | The integrity of application firmware is not guaranteed... |
351 | 4+0 records in |
352 | 4+0 records out |
353 | 4+0 records in |
354 | 4+0 records out |
355 | Launch mdev for checking firmware in USB storage... |
356 | ufsd: no version for "struct_module" found: kernel tainted. |
357 | ufsd: driver loaded at c00f0000 built on Aug 17 2009 19:48:53 |
358 | UFSD version 7.04 (Aug 17 2009, 19:47:43) |
359 | NTFS read/write support included |
360 | Hfs+/HfsX read/write support included |
361 | $Id : ufsdvfs.c,v 1.213.2.13 2009/07/29 16:43:15 shura Exp $ (LBD=ON) |
362 | mount: mounting /dev/sda1 on /mnt/sda1 failed: Invalid argument |
363 | mount: mounting /dev/sda1 on /mnt/sda1 failed: Invalid argument |
364 | mount: mounting /dev/sda1 on /mnt/sda1 failed: Invalid argument |
365 | mount: mounting /dev/sda1 on /mnt/sda1 failed: Invalid argument |
366 | EXT2-fs warning (device sda1): ext2_fill_super: mounting ext3 filesystem as ext2 |
367 | mount: mounting /dev/sda on /mnt/sda failed: Invalid argument |
368 | mount: mounting /dev/sda on /mnt/sda failed: Invalid argument |
369 | mount: mounting /dev/sda on /mnt/sda failed: Invalid argument |
370 | mount: mounting /dev/sda on /mnt/sda failed: Invalid argument |
371 | mount: mounting /dev/sda on /mnt/sda failed: Invalid argument |
372 | mount: mounting /dev/sda on /mnt/sda failed: Invalid argument |
373 | mount: mounting /dev/sda on /mnt/sda failed: Invalid argument |
374 | mount: mounting /dev/sda on /mnt/sda failed: Invalid argument |